Page 30 of 30 FirstFirst ... 202627282930
Results 871 to 888 of 888

Thread: New E-Mag/X-Mag board!!!!!!

  1. #871
    Join Date
    Mar 2012
    Posts
    377
    Thought I'd post my experience with the board and how helpful Jai was with my install troubles. The only issue I faced with install was having the halo sensor register consistent trigger pulls to initiate a discharge to the solenoid. The problem in one of my Emag was getting adequate distance between the halo sensor and the trigger magnet. Jai mentioned that this was the second frame that he knows about with this issue. I believe zondo had this same problem? I made shims to insert in front of the sensor to ever so slightly offset it towards the valve. This made a world of difference. Thought I'd post so others can potential utilize if they have trouble with initial registering trigger pulls. FYI - Make sure you have the halo sensor facing the correct way. There is very small writing on one side of the sensor, which should face forward-toward the barrel. The halo sensor also has a slight bevel or ridge on the correct side that should face forward. I was fortunate with installing it correctly, although I didn't appreciate the characteristics to orient the installer with the proper direction.

    I must recognize Jai for his willingness to support and trouble shoot the issue. A great experience that many companies could learn from him and the positive interaction he has with his customers. Top notch!

  2. #872
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    UPDATE

    RATT - Youre board has shipped. Tracking on first page has been updated
    _______________________
    Jai "P8ntbal4me" Menard

  3. #873
    Join Date
    Feb 2005
    Location
    Soon to be the Dirty jErZ
    Posts
    8,971
    A quick review...

    It's been a while and after coming across this thread I thought I would post a few thoughts.

    I recently built a emag using one of these boards. I followed my own parameters that I have used on all of my guns now for years after tons of trial an error to get the best results. Well, this ****er was by far the fastest emag I have ever shot. It takes some getting used to the blinky lights, but the trade off is worth it.

  4. #874
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    👍🏼
    Video :-)

  5. #875
    Join Date
    Feb 2005
    Location
    Soon to be the Dirty jErZ
    Posts
    8,971
    Quote Originally Posted by p8ntbal4me View Post
    ����
    Video :-)
    Someday

  6. #876
    Join Date
    Aug 2013
    Posts
    31
    Okay, so how do I get the board I paid for?

  7. #877
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    Quote Originally Posted by JimBobFett View Post
    Okay, so how do I get the board I paid for?
    Sent you a reply email back two days ago about how to get your board.

    Please check your email....

  8. #878
    Join Date
    Aug 2013
    Posts
    31
    Quote Originally Posted by p8ntbal4me View Post
    Sent you a reply email back two days ago about how to get your board.

    Please check your email....
    Ah, thanks! I didn't see that. Replied.

  9. #879
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    JimBobFett - Your board has shipped!

  10. #880
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    **** new purchase options available on first page **

  11. #881
    Join Date
    Sep 2008
    Posts
    157
    Funds sent today for:
    Board, HES, Power Cable, Solenoid Coil = $210 (shipping and insurance INCLUDED within CONUS)

  12. #882
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    Quote Originally Posted by mwerne04 View Post
    Funds sent today for:
    Board, HES, Power Cable, Solenoid Coil = $210 (shipping and insurance INCLUDED within CONUS)
    Funds received

  13. #883
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    Quote Originally Posted by p8ntbal4me View Post
    JimBobFett - Your board has shipped!
    Tracking number is on the first post in this thread

  14. #884
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,576
    Mwerne04 - Your Board has shipped! Tracking number is on the first post in this thread (spot #39)

  15. #885
    Join Date
    Aug 2013
    Posts
    31
    Quote Originally Posted by p8ntbal4me View Post
    Tracking number is on the first post in this thread
    Received package... haven't even had time to open it with all my other projects, but I'll try firing it up soon. Trying to access the instructions now...
    Last edited by JimBobFett; 02-07-2018 at 04:00 PM.

  16. #886
    Join Date
    Aug 2013
    Posts
    31
    What is the model # of the hall effect sensor?

  17. #887
    Join Date
    Dec 2002
    Location
    Houston TX
    Posts
    404
    I'm down for one.
    "Crush Your Opponents, See Them Eliminated Before You, & Hear The Lamentations Of Their Team Captains!"

  18. #888
    Join Date
    Oct 2014
    Posts
    39
    These boards are excellent, and the seller is great. I made a simple programming guide after watching the videos and looking up stuff on BEO. Thought it might be nice for others not to have to search for the info. Feel free to add to the initial post if desired.

    Reflex Paintball Customs Programing Guide.pdf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •