Page 1 of 8 12345 ... LastLast
Results 1 to 30 of 893

Thread: New E-Mag/X-Mag board!!!!!!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580

    New E-Mag/X-Mag board!!!!!!

    REFLEX PAINTBALL CUSTOMS
    E-Mag/X-Mag Board

    This is a completely new board that will replace the no longer available OEM boards

    Board, HES, & Power Cable ONLY = $180
    Board & Power Cable ONLY = $125(shipping and insurance INCLUDED within CONUS)
    Board ONLY = $110 (shipping and insurance INCLUDED within CONUS)
    ** Solenoid Coils are limited as of 1/12/18, may not be able to purchase them much longer **


    How to Purchase:
    Contact me via EMAIL. JJAI@COMCAST.NET
    Payment in the form of "Personal - Gift" via Paypal ONLY


    Purchase & Shipping Information: (copy this into your EMAIL AND YOUR PAYPAL NOTES and fill the information out)
    Your AO Name:
    Your First and Last Name:
    Your Paypal Shipping Address (the address on your paypal account where you have items sent to)
    Your Shipping Address (the address we are sending the board to; can be different than the address above)
    Your Phone Number (xxx-xxx-xxxx)
    Your Paypal E-Mail Address (the one registered with Paypal)
    Your E-Mail Address (if different from the paypal e-mail address)
    Payment(s) Sent: (we would like the buyer as well as us keeping track of all payments sent to avoid any confusion; include amounts and dates)
    Payment Form: Payments MUST be sent as a "Personal - Gift" to: jjai@comcast.net


    The List:

    1 - P8ntbal4me
    2 - BigEvil
    6 - Imasho - $160
    7 - GVMV - $100
    8 - mrairman - $160 (address confirmed) (FEDEX - 780278653753) SHIPPING = $18.13 (RETURNED TO SENDER)
    11 - havinnoj - $160 ( this spot was Tropical Life's and was sold per post #568 dated 9/10/2013)
    13 - Emil- $100 / Paid $120 on both boards (13 & 14) to total = $316.22 (not sent as gift) (USPS - 9407803699300016261615) SHIPPING = #12.00
    14 - Emil - $100 / see above
    20 - promethion - $100
    35 - smilestyler - (USPS - LZ314239791US) SHIPPING = $9.50

    ***as of 1/12/2018, The buyers above this post that still owe a balance on their purchase have not been in contact with me for 2 years. Your purchase is now up for sale at full price for anyone whom wishes to purchase it. ******

    3 - Ando - $320 (paid $320 for two boards on 7/13/2012) (SHIPPED AND RECEIVED) ACCOUNT PAID IN FULL!
    36 - Ando (paid for 2 boards / see #3 above)
    4 - zondo = (FEDEX - 780278651393) ACCOUNT PAID IN FULL!
    5 - splat15k - (FEDEX - 780278611632) ACCOUNT PAID IN FULL!
    9 - Chris - (FEDEX - 780278601860) ACCOUNT PAID IN FULL!
    9 - Ratt - $160 (USPS - 9407803699300029709937) ACCOUNT PAID IN FULL!
    10 - robander3 - (USPS - 9407403699300008583178) ACCOUNT PAID IN FULL!
    12 - weekendballer - (USPS - 9407803699300015938785) ACCOUNT PAID IN FULL!
    15 - tolar250 -(FEDEX - 780278655815) ACCOUNT PAID IN FULL!
    16 - RST - (USPS - LZ314239788US) ACCOUNT PAID IN FULL!
    17 - Hellrox - (USPS - LZ315606885US) ACCOUNT PAID IN FULL!
    18 - rukh013 - (USPS - 9407803699300015857956) ACCOUNT PAID IN FULL!
    19 - PanzerGen - (USPS - 9407803699300016028133) ACCOUNT PAID IN FULL!
    21 - knownothingmags - (USPS - 9407403699300008364289) ACCOUNT PAID IN FULL!
    22 - knownothingmags - (USPS - 9407403699300008364289) ACCOUNT PAID IN FULL!
    23 - bbotts77 - (FEDEX - 780278615248) ACCOUNT PAID IN FULL!
    24 - reckid1986 - (FEDEX - 780278608279) ACCOUNT PAID IN FULL!
    25 - Loguzzzzzz - (FEDEX - 780278645148) ACCOUNT PAID IN FULL!
    26 - JimBobFett - (USPS - 9407803699300037278067) ACCOUNT PAID IN FULL!
    27 - goin5150 - (USPS - 9407403699300008583185) ACCOUNT PAID IN FULL!
    28 - flampaint - (USPS - LZ314239765US) ACCOUNT PAID IN FULL!
    29 - Spartacus - (USPS - 9407403699300008583161)ACCOUNT PAID IN FULL!
    30 - Arston - (FEDEX - 780278657748) ACCOUNT PAID IN FULL!
    31 - Arston - (FEDEX - 780278657748) ACCOUNT PAID IN FULL!
    32 - tolar250 - (USPS - 9407803699300014543188) ACCOUNT PAID IN FULL!
    33 - maverick13 - (USPS - LZ314239774US) ACCOUNT PAID IN FULL!
    34 - knownothingmags - (USPS - 9407403699300008364289) ACCOUNT PAID IN FULL!
    37 - SummaryJudgement - (USPS - 9434910200883557505640) ACCOUNT PAID IN FULL!
    38 - mixwell2 - (USPS - 9407803699300015938761) ACCOUNT PAID IN FULL!
    39 - Mwerne04 - (USPS - 9407803699300037709745) ACCOUNT PAID IN FULL!

    BOARDS #39-100 ARE FOR SALE * ONLY A FEW SOLENOID COILS REMAIN!!!

    Get one of these now. Unless someone fronts the production cost up front ($5,000) I will not be making any more.



    Reflex Paintball Cutsomes E/X-Mag Board Installation Guide/Manual
    Last edited by p8ntbal4me; 11-23-2019 at 10:03 AM. Reason: adding payment updates

  2. #2
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    OMG ITS BOB FROM TAG!!!! HOW DID YOU HACK JAI'S ACCOUNT!!!


    Put me down for one for sure... maybe more. LMK when to send some $$



  3. #3
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Oh, another thing.. how set in stone is the software at this point?

  4. #4
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by BigEvil
    Oh, another thing.. how set in stone is the software at this point?
    As sure as the Granite Quarry's are up here in NH.....

    ,.. and yes,.. everyone will be MOST PLEASED
    _______________________
    Jai "P8ntbal4me" Menard

  5. #5
    Join Date
    Dec 2006
    Location
    SoCal
    Posts
    2,245
    Quote Originally Posted by p8ntbal4me
    As sure as the Granite Quarry's are up here in NH.....

    ,.. and yes,.. everyone will be MOST PLEASED
    Wait, what happened to the old man on the mountain?

    Are you still supporting the new HES?

    Put me on the list...

  6. #6
    Join Date
    Feb 2008
    Posts
    58
    me too

  7. #7
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    I'll be down for a backup.

  8. #8
    Join Date
    May 2009
    Location
    nj
    Posts
    828
    I'm down for one.

  9. #9
    Join Date
    Aug 2010
    Posts
    23

    i want one sir

    Quote Originally Posted by p8ntbal4me
    New E-Mag/X-Mag board

    Yes,.. you read that correctly!

    We are going to make a new board for the E-Mag and X-Mag

    This will be a completely new board that will replace the no longer available OEM boards

    The board will be a “drop in replacement” product

    We are going to make some changes to the current design to make it more up to date

    We are looking to support some of the following features:
    The ACE board
    Break Beam/Bounce Beam Eye Systems
    HES trigger
    Use the rear button as a power switch
    Use the rear button as a mode/eye switch
    Multi-color LED (no LED Screen)
    Warp Feed Port
    Solenoid Port
    Power Port
    Solenoid Polarity Correction
    RF Hopper link


    We are looking to make 100 boards in the first run

    We are still working on a price. It looks to be $150+

    We will test the board in video for all of you to see it prior to committing an order for production

    If you would like to be on the list at production time, please post here (No PMs)

    We will answer all questions about the board, price, shipping, software. code, options, etc at a later date

    Thank You,.....

    The List:

    1 - P8ntbal4me
    2 - BigEvil
    3 - Ando
    4 - sjrtk
    5 - zondo
    6 - 4rpp
    7 - splat15k
    8 - Swamp Thing
    9 - Ratt
    10 - IrishRedneck86
    11 - Dirg
    12 - Loguzzzzzz
    13 - SSP Reaper
    14 - Ruler Mark
    15 - onecaribou
    16 - Enhander
    17 - fierymartel
    18 - inkedballer
    19 - Three Psycho
    20 - pk5
    21 - bbotts77
    22 - Predaator.
    23 - motodrom16
    24 - erebus
    25- mrairman

  10. #10
    Join Date
    Sep 2010
    Location
    Ontario Canada
    Posts
    96
    Guess that will make me # 26

  11. #11
    Join Date
    Jun 2001
    Location
    Richmond,B.C., Canada
    Posts
    183
    Quote Originally Posted by Imasho
    Guess that will make me # 26
    Make me #27
    If you can't join em, shoot em !

  12. #12
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    We are still moving right along with the new boards. Circuit design is complete. We are working on the ACE right now.

    As for software: we are looking into licensing options. We also have developed code for testing the boards during prototyping.

    We will have more information later on.

  13. #13
    Join Date
    Jun 2001
    Location
    Richmond,B.C., Canada
    Posts
    183
    Will the ACE plug straight into the board or will it be mounted on a second board like it currently is ? Also will the board include the eye and harness or will that be separate ?

  14. #14
    Join Date
    Nov 2010
    Location
    East Coast
    Posts
    498
    .....
    Last edited by Tropical Life; 12-01-2011 at 03:44 PM.

  15. #15
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    Christ. Your EMag will hit 20+ BPS with what you have now. It's not tuned like EVERYONE'S BEEN TRYING TO TELL YOU!!!

    Send your marker over to Tuna cause due to your lack of mannerism, I seriously doubt we can run you through the process.

  16. #16
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Quote Originally Posted by Ando
    Christ. Your EMag will hit 20+ BPS with what you have now. It's not tuned like EVERYONE'S BEEN TRYING TO TELL YOU!!!

    Send your marker over to Tuna cause due to your lack of mannerism, I seriously doubt we can run you through the process.

    THIS

  17. #17
    Join Date
    May 2009
    Location
    nj
    Posts
    828
    Hey don't start this here. You two know better.

  18. #18
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Quote Originally Posted by Tropical Life
    Hi will your new boards be able to shoot more then 20 bps with stock solenoid? if yes how so?

    Thanks
    Yes,.. the new boards will be able to hit a CPS rate of 50.

    Much more than the AGD solenoid has been confirmed to reach.

  19. #19
    Join Date
    Sep 2003
    Location
    NY
    Posts
    163
    You can count me in for one when you start selling

  20. #20
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580

    Update

    We had a change in the board design.

    When we were having so much trouble with the ramping software, we didn't think a hardware issue was to blame.

    Now, we have made a massive change to the current design which will aid us in re-programming in the future for updates.

    Production boards have been re-issued and the bare boards should be completed in a few weeks.
    Last edited by p8ntbal4me; 06-30-2011 at 03:52 AM. Reason: spelling and such

  21. #21
    Join Date
    May 2009
    Location
    nj
    Posts
    828
    Time to hurry up and wait!!!! Kidding, good work i can't wait to be able to use the board.


  22. #22
    Join Date
    Nov 2010
    Location
    East Coast
    Posts
    498
    Looks sweet,

    "NOTICE
    For those of you that have X-mags or E-mags with milling to support the ACE board, the new ACE boards WILL be completed next."

    Keeping an eye out for when you release the new ace boards also. Hopefully it will be done with main boards to get a sweet combo. Would be nice if the new ace boards have a on/off switch installed option.

  23. #23
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Im glad to see that all of your hard work and efforts are paying off.


    On another note, have you thought of a name for it yet? Can I nominate "F.U.B.S." or "F.U.T.S."

  24. #24
    Join Date
    Oct 2000
    Location
    Morgan Hill, CA
    Posts
    838
    I don't see my name on the preorder list yet. Please add me, I will take one of the first boards.

  25. #25
    Join Date
    Oct 2000
    Location
    Morgan Hill, CA
    Posts
    838
    Payment sent in full.

  26. #26
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Updated first post with payments received!

  27. #27
    Join Date
    Apr 2010
    Location
    Near Toronto, Canada
    Posts
    835
    I just wanted to say that this is awesome that you've done this. I'd shake your hand if I could.

    Some boards are just beyond repair, its good to know that all is not lost.

  28. #28
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    Some boards are just beyond repair, its good to know that all is not lost.
    I felt bad after the first try fell through.

    After 3 years, we will have replacement parts we need to keep going.

    Just think, in a few years I will have an OLED/LCD board in the works.

  29. #29
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,580
    4 payments out of 47 needed.

    We cant move to production until you guys get on board.

  30. #30
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    624
    ill take one

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •