Page 1 of 4 1234 LastLast
Results 1 to 30 of 113

Thread: Started my mini gun mag

  1. #1
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134

    Started my mini gun mag

    It will have spinning barrels and will look like the ones in the movies with a 2000 round hopper on top of it.
    The mill i used



    Here is the piece of aluminum that i am making the EP sear tripping box from. The trigger will sit on top of the marker with the 2000 round hopper in front of the triger frame, so i only need a small hollow block to hold the noid and ram.

    A little work with a drill press and a slide vice and we are off and milling

    The tools i am using cost less than $200, A ryobi 1/4hp drillpress and a $100 slide vice. It is still ruf but it wont be for long


    I cut the ram flat on all four sides and taped it to the noid. The lowers are ready to go



    Last edited by hill160881; 03-22-2011 at 10:12 AM.

  2. #2
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    The hopper material. I wish i had a cornis brake, or box and pan brake. That would make this a fast job but without either i am down to the beat it method. I will be smoothing everything out and make the inside of the hopper less jagged once i have had a successful test run.






    The 45k psi back pack air suply.
    Last edited by hill160881; 02-06-2011 at 04:32 PM.

  3. #3
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    The current progress. I added feet, a lid and a cover for the barrels on the front. I also started smoothing things out.



    The material for the barrels, 4" cupling, 1/2" pvc tubing, and 1/2" plywood.


    Last edited by hill160881; 02-12-2011 at 06:49 PM.

  4. #4
    Join Date
    May 2001
    Location
    South Carolina
    Posts
    398
    Pulling up a chair for this one
    No gun

  5. #5
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    I was given a visual demonstration of this beast in person. And even though the mini gun was invisible it was still very impressive!!!!

    This ---> is an understatement.

    More like this --->

  6. #6
    Join Date
    May 2009
    Location
    nj
    Posts
    785
    I got the recliner in front of the screen.

  7. #7
    Join Date
    Nov 2010
    Location
    East Coast
    Posts
    492
    GO FOR IT!!!!!

  8. #8
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,201
    You could do some spinning barrels, rotating over the central, shorter one, justo to give it the real "look", you know? All you had to do was attach a circle with the barrels coming off of it on one side and, on the other, attach a portable drill to make them spin. I mean, if you are already considering the weight of 2000 rounds over your Mag and the barrels, the drill won't make for such extra weight LOL. You can even derive the trigger wires to turn the drill on.

  9. #9
    Hill, do you have a picture of the look you're going for?

  10. #10
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    I will do one tomorrow when i get the trigger assembly and mount done. But if you have seen T2 then think of the seen where arnold(the terminator) thrashes the cops from the high rise.


    Here you go
    http://www.youtube.com/watch?v=EWIJO...eature=related
    Last edited by hill160881; 02-03-2011 at 11:33 PM.

  11. #11
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    It will be functional this weekend but i still need a board that will do 30 BPS with the eyes off. The hopper will be fun to build. Fortunately i have been through sheet-metal tech-school and i still remember a thing or two. i hope to try it out saturday

    PS: Updated pics

  12. #12
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Once i get the Tadao board on monday it will rip on full auto and i will not need to three finger the trigger. I will also have the hopper totally operational at max capacity.

    The first shooting video at 15 bps semi mode
    http://www.youtube.com/watch?v=c4eUOvfigIo

  13. #13
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,201
    Quote Originally Posted by hill160881
    Once i get the Tadao board on monday it will rip on full auto and i will not need to three finger the trigger. I will also have the hopper totally operational at max capacity.

    The first shooting video at 15 bps semi mode
    http://www.youtube.com/watch?v=c4eUOvfigIo
    You do know that the image shown at 0:45 makes one think you are doing something nasty, right? LOL

    Anyways, I like the project. Came out pretty simple, yet efficient. The only two things I'd do:

    - make a smaller loader, maybe for 1,000 rounds instead of 2,000 (that one looks way too big for me)
    - make the 6 barrels over the firing one and install a good loudner on the one you actually use.

    I still would try making the 6 barrels turn with a drill, just for the looks. But that could be done later.

    Going well as it is. Congrats on the project.


  14. #14
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    First things first.

    love the socks!!!

    Thats actually how I showed up to Cureball. Not proud to admit it

    And yes it looks like you are playing with yourself out in the woods. May want to adjust a few things

    MPSD- I believe Hill is going to have the barrels rotate with a warp motor. No point adding a drill if something much smaller can do the job.

    Edit: I thought he said a warp motor. But that info is no longer in the thread. hmm.

  15. #15
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Yes a warp motor to rotate the barrels. I new someone would say something about me fondling my.............trigger. lol

    Like i said i am waiting for the tadao board to go full auto

  16. #16
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    WOW I love this thing. 1000 rounds uninterrupted at 25 bps. The ram set screws were not locktited in so they came loose at around 1000 rounds but you get the idea. FIRE POWER!

    http://www.youtube.com/watch?v=8Usv-rgM8Hk

  17. #17
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,201
    Quote Originally Posted by hill160881
    WOW I love this thing. 1000 rounds uninterrupted at 25 bps. The ram set screws were not locktited in so they came loose at around 1000 rounds but you get the idea. FIRE POWER!

    http://www.youtube.com/watch?v=8Usv-rgM8Hk
    LOL! That is ridiculous!!! You'll have to walk around with a scuba tank on your back LOL!

    Congrats. Really impressive!

  18. #18
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    Quote Originally Posted by mpsd
    LOL! That is ridiculous!!! You'll have to walk around with a scuba tank on your back LOL!

    Congrats. Really impressive!
    Not a scuba... but a firemans bottle actually... harness and all..

    DM

  19. #19
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566

  20. #20
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Well i wont be doing another video like that for a while. It was like $20. But i will keep the thread updated as i figure out the rotating barrels.

    I cant wait to use it on some unsuspecting Agglets. For now it looks stupid, until i pull the trigger.

  21. #21
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    It looks like you are about texture some walls.

    I picture Scarface more then Terminator.

  22. #22
    Join Date
    Mar 2009
    Location
    Beaumont,Tx.
    Posts
    1,005
    S.O.Beeches why is my puter Youtubally challenged...you need to photobucket the good vids so I can see them too.

  23. #23
    I wonder how heavy that thing is going to be when its fully loaded.

  24. #24
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    He's a big boy. He can run that thing around I'm sure..

  25. #25
    Join Date
    Sep 2008
    Location
    Ohio
    Posts
    4,548
    Push it over the top and go double barreled.

  26. #26
    Join Date
    Oct 2004
    Location
    Indiana
    Posts
    2,969
    Quote Originally Posted by OPBN
    Push it over the top and go double barreled.
    if he does that then he needs to rethink the loader which would be wider at the base and require something like another rotor to feed it which would mean might as well just get a 55gal drum cut holes in the bottom and dump in a few cases and let it eat



    all that aside though thats freaking awesome!!!! im not sure but i think i peed a lil bit
    2k2 Angel LCD
    turbo trigger
    CP volumizer
    PIPE KIT

    2k Angel CnC LCD
    Vert Frame
    Freak Barrel

    B2k x-milled
    micro rock
    Dye sticky 3's
    vertical max-flo
    Edge barrel with blue J&J tip

    Egg 2 y board
    Empire Reloader
    Dye Throttle 91/4500
    Crossfire 114ci/3000
    Angel Air Reg

  27. #27
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Quote Originally Posted by Flatliner333
    S.O.Beeches why is my puter Youtubally challenged...you need to photobucket the good vids so I can see them too.
    http://s971.photobucket.com/albums/a...t=100_0923.mp4

  28. #28
    Join Date
    Mar 2009
    Location
    Beaumont,Tx.
    Posts
    1,005
    Holy Hell ...thanx for the photobucket vid....You should put decals all over the box hopper like a Nascar...maybe you could get a paint sponsorship so you can afford to shoot that thing...paging VF-XX.

  29. #29
    Join Date
    Nov 2010
    Location
    East Coast
    Posts
    492
    Hill your a beast man, keep it up...

  30. #30
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,201
    Hill, where did you get that 400 ci 4500 psi air tank from?

    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •