Results 1 to 30 of 113

Thread: Started my mini gun mag

Hybrid View

  1. #1
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134

    Started my mini gun mag

    It will have spinning barrels and will look like the ones in the movies with a 2000 round hopper on top of it.
    The mill i used



    Here is the piece of aluminum that i am making the EP sear tripping box from. The trigger will sit on top of the marker with the 2000 round hopper in front of the triger frame, so i only need a small hollow block to hold the noid and ram.

    A little work with a drill press and a slide vice and we are off and milling

    The tools i am using cost less than $200, A ryobi 1/4hp drillpress and a $100 slide vice. It is still ruf but it wont be for long


    I cut the ram flat on all four sides and taped it to the noid. The lowers are ready to go



    Last edited by hill160881; 03-22-2011 at 10:12 AM.

  2. #2
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    The hopper material. I wish i had a cornis brake, or box and pan brake. That would make this a fast job but without either i am down to the beat it method. I will be smoothing everything out and make the inside of the hopper less jagged once i have had a successful test run.






    The 45k psi back pack air suply.
    Last edited by hill160881; 02-06-2011 at 04:32 PM.

  3. #3
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    The current progress. I added feet, a lid and a cover for the barrels on the front. I also started smoothing things out.



    The material for the barrels, 4" cupling, 1/2" pvc tubing, and 1/2" plywood.


    Last edited by hill160881; 02-12-2011 at 06:49 PM.

  4. #4
    Join Date
    May 2001
    Location
    South Carolina
    Posts
    398
    Pulling up a chair for this one
    No gun

  5. #5
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    I was given a visual demonstration of this beast in person. And even though the mini gun was invisible it was still very impressive!!!!

    This ---> is an understatement.

    More like this --->

  6. #6
    Join Date
    May 2009
    Location
    nj
    Posts
    785
    I got the recliner in front of the screen.

  7. #7
    Join Date
    Nov 2010
    Location
    East Coast
    Posts
    492
    GO FOR IT!!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •