Results 1 to 30 of 113

Thread: Started my mini gun mag

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2008
    the country of california

    Started my mini gun mag

    It will have spinning barrels and will look like the ones in the movies with a 2000 round hopper on top of it.
    The mill i used

    Here is the piece of aluminum that i am making the EP sear tripping box from. The trigger will sit on top of the marker with the 2000 round hopper in front of the triger frame, so i only need a small hollow block to hold the noid and ram.

    A little work with a drill press and a slide vice and we are off and milling

    The tools i am using cost less than $200, A ryobi 1/4hp drillpress and a $100 slide vice. It is still ruf but it wont be for long

    I cut the ram flat on all four sides and taped it to the noid. The lowers are ready to go

    Last edited by hill160881; 03-22-2011 at 11:12 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts