Results 1 to 30 of 116

Thread: Started my mini gun mag

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,136

    Started my mini gun mag

    It will have spinning barrels and will look like the ones in the movies with a 2000 round hopper on top of it.
    The mill i used



    Here is the piece of aluminum that i am making the EP sear tripping box from. The trigger will sit on top of the marker with the 2000 round hopper in front of the triger frame, so i only need a small hollow block to hold the noid and ram.

    A little work with a drill press and a slide vice and we are off and milling

    The tools i am using cost less than $200, A ryobi 1/4hp drillpress and a $100 slide vice. It is still ruf but it wont be for long


    I cut the ram flat on all four sides and taped it to the noid. The lowers are ready to go



    Last edited by hill160881; 03-22-2011 at 10:12 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •