Results 1 to 28 of 28

Thread: Invisible invert Mini style eyes on a mag, possible?

Hybrid View

  1. #1
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134

    Question Invisible invert Mini style eyes on a mag, possible?

    I think it is very possible to mount eyes from underneath without showing any evidence on the outside of the mag.

    Here is my experiment. I am sure i will up at some point and destroy a $100 body but it was donated to the cause by the Devil

    And at this point I have proven it can be done, I just need to figure out how to drill the hole from the inside without a Dentist tool.

    Ok here it is, moded and setting on a rail to show they are unseen.




    And now for the porn!







    More to come as I figure things out.
    Last edited by hill160881; 04-11-2011 at 08:32 PM.

  2. #2
    Join Date
    Aug 2002
    Location
    FURF!!!!!!!!!!!!!!!!!!!!!
    Posts
    2,828
    There is a Karta body floating around out there that I had Luke do some work to with a Spyder frame that has a reflective Eye mounted under the breach area.


    Styg
    Sometimes It's Good to be EVIL

  3. #3
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,668
    Could that just be machined out with an end mill?
    I canít really tell where it is in relation to the inside of the breach. (??)

  4. #4
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Yes, I used an 1/8" straight router bit as a end mill and milled a flat spot centered in the same location as the external eye milling you do. To keep it from being seen i scribed a line with it on a rail and just stayed below that line. Then I drilled two holes the width of the eyes with a 3/32" drill bit and conected them with a very small dremmal bit

  5. #5
    Join Date
    Oct 2004
    Location
    Daniel Island, SC
    Posts
    1,393
    can we get pics of inside of the breech?

  6. #6
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,668
    I was talking about the inside of the breech..

  7. #7
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    THEY WORK!
    <iframe width="640" height="480" src="http://www.youtube.com/embed/JB8UZREoYHE?rel=0" frameborder="0" allowfullscreen></iframe>
    Last edited by hill160881; 01-23-2012 at 08:40 PM.

  8. #8
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,668
    sweet!

  9. #9
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    woot woot.... closer and closer the project comes!!!

    DM

  10. #10
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    I sent the body to luke so he can see if this is something he is interested in offering.

  11. #11
    Join Date
    Oct 2007
    Location
    Oh Canada *PL*
    Posts
    419
    NICE!

    Looks good, and works too.... perfect.

    Nice job.

    I like your video showing the two different hoppers being used for a demonstration of the sensitivity, worked great.

    D.K.

  12. #12
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,188
    WOW! Hill, you are getting better and better I must say.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •