Invisible invert Mini style eyes on a mag, possible?

[hill160881]

I think it is very possible to mount eyes from underneath without showing any evidence on the outside of the mag.

Here is my experiment. I am sure i will up at some point and destroy a $100 body but it was donated to the cause by the Devil

And at this point I have proven it can be done, I just need to figure out how to drill the hole from the inside without a Dentist tool.

Ok here it is, moded and setting on a rail to show they are unseen.




And now for the porn!







More to come as I figure things out.

[StygShore]

There is a Karta body floating around out there that I had Luke do some work to with a Spyder frame that has a reflective Eye mounted under the breach area.


Styg

[luke]

Could that just be machined out with an end mill?
I can’t really tell where it is in relation to the inside of the breach. (??)

[hill160881]

Yes, I used an 1/8" straight router bit as a end mill and milled a flat spot centered in the same location as the external eye milling you do. To keep it from being seen i scribed a line with it on a rail and just stayed below that line. Then I drilled two holes the width of the eyes with a 3/32" drill bit and conected them with a very small dremmal bit

[captian pinky]

can we get pics of inside of the breech?

[luke]

I was talking about the inside of the breech..

[hill160881]

THEY WORK!

[luke]

sweet!

[DevilMan]

woot woot.... closer and closer the project comes!!!

DM

[hill160881]

I sent the body to luke so he can see if this is something he is interested in offering.

[my automag]

NICE!

Looks good, and works too.... perfect.

Nice job.

I like your video showing the two different hoppers being used for a demonstration of the sensitivity, worked great.

D.K.

[mpsd]

WOW! Hill, you are getting better and better I must say.