Page 1 of 4 1234 LastLast
Results 1 to 30 of 109

Thread: 2009 PTP Micromag Repair Thread - PTP Washer Insert

  1. #1
    Join Date
    May 2007
    Location
    Fox Paintball Territory
    Posts
    779

    2009 PTP Micromag Repair Thread - PTP Washer Insert

    All,

    I decided to start a new thread for the repairs. Hopefully this is approved by the mods and PTP. A representative from PTP posted the following on the original design/purchase thread.


    Quote Originally Posted by ZoomZ@PTP
    This is the first ive hear of this issue b/c i havnt checked this thread in forever so Im going to step in here and handle this for you guys .

    The material is certified as T6-7075 and the problem is from the rotation of the spring from what ive read here .

    I didnt think there was going to be as much rotation as there is with some of the springs .

    Some guns are not affected by this and i think its the difference in the springs .

    ANYONE having a problem with this issue , ship your gun body to me personaly and i will fix it for free and pay to ship it back to you with a pressed in Stainless Steel insert .

    Make sure your name and address is clearly marked on the box please.

    Alooney , pm me please .

    Pro Team Manufacturing
    C/o Russell K Breeden
    5316 McIntosh Point
    Sanford Fl 32773
    Hopefully PTP will have a good turnaround time as 175 bodies were sold. This is a big investment for everyone. Therefore, lets support this thread to achieve what we all want...A usable Micromag body.

    I realize that others are having additional issues. I ask that those issues be addressed in the original thread. This thread should be for the washer insert only.

    Thank You!

  2. #2
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,796
    Quote Originally Posted by ZoomZ@PTP
    This is the first ive hear of this issue b/c i havnt checked this thread in forever so Im going to step in here and handle this for you guys .

    The material is certified as T6-7075 and the problem is from the rotation of the spring from what ive read here .

    I didnt think there was going to be as much rotation as there is with some of the springs .

    Some guns are not affected by this and i think its the difference in the springs .

    ANYONE having a problem with this issue , ship your gun body to me personaly and i will fix it for free and pay to ship it back to you with a pressed in Stainless Steel insert .

    Make sure your name and address is clearly marked on the box please.

    Alooney , pm me please .

    Pro Team Manufacturing
    C/o Russell K Breeden
    5316 McIntosh Point
    Sanford Fl 32773

    Russell, can I just get the part sent to me without sending in my body? I have a raw body that is not ready for the repair. Thanks

  3. #3
    Join Date
    Oct 2008
    Location
    Winter Springs Fl
    Posts
    230
    I will send out washers to those who need them but you have to understand , if you dont get the washer in straight it will ruin the body .

    I dont want to hear about someone ruining their gun because they didnt want to send the gun in for repairs .

    If you would like a washer sent to you please email RKBENG@cfl.rr.com with WASHER in the subject line along with full name and physical address .

    I will fit these washers into production some time between Thanksgiving and the Christmas break .

    Turn around will be swift and immediate once the washers are made so dont ship any guns untill after Thanksgiving please .

  4. #4
    Join Date
    Feb 2003
    Location
    Pullman :)
    Posts
    710
    Sweet. I'll send you the body as soon as I hear you have washers ready. Thanks!
    Rehme, Derman 2k, Ryal 999, Lord Whoopass, 50 Cal, Tack, RTrampage and Deathstalker are all good traders

    My Feedback
    http://www.automags.org/forums/showthread.php?s=&threadid=100494

  5. #5
    Join Date
    Jun 2002
    Posts
    490
    Quote Originally Posted by Pullman
    Sweet. I'll send you the body as soon as I hear you have washers ready. Thanks!
    I second that motion!!!!

    Russell thanks for stepping in on this. Its a cool body and am relieved to hear I get to still use it!!

    I'll get mine to you when your ready as well.

  6. #6
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,488
    Ill send my two bodies in once said washers are proven to work.

    PTP Question: these will NOT be removable? Meaning if we get bodies re-anodized, we need new washers?
    _______________________
    Jai "P8ntbal4me" Menard

  7. #7
    Join Date
    Oct 2002
    Location
    Sanford, FL
    Posts
    243
    Hi Russel,

    I live in Sanford, so I can bring the body by and pick it up after the repair. Please let me know when would be a good time to come by, I work from home so I am very flexible. I do have the damage on mine, so if you want a body to look at before you start making the washers, I can bring my whole setup by at anytime. I'll e-mail you my contact info in case you'd rather coordinate that way.

    Thanks,

    Yuk a.k.a. Doubledutch

  8. #8
    Join Date
    Oct 2008
    Location
    Winter Springs Fl
    Posts
    230
    HAHA Dutch , We get to use your gun as the crash test dummy ! !

    When i get the washers made im going to test them on a couple different local guns .

  9. #9
    Join Date
    Sep 2003
    Location
    virginia
    Posts
    336
    Question... I don't have any damage on my bodies, but I'd love the extra protection. Does that count?

  10. #10
    Join Date
    May 2008
    Location
    San Jose, CA
    Posts
    926
    Quote Originally Posted by robertsr1811
    Question... I don't have any damage on my bodies, but I'd love the extra protection. Does that count?
    Same here here. Id like to send in my two bodies.

  11. #11
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,428
    Quote Originally Posted by robertsr1811
    Question... I don't have any damage on my bodies, but I'd love the extra protection. Does that count?

    same here, i have one MM2K9 body to send in if thats Kool? thank you!

  12. #12
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    4,659
    I would like the security of having the washer installed as well.

  13. #13
    Join Date
    Apr 2009
    Posts
    274
    Extra piece of mind for me as well

  14. #14
    Join Date
    Oct 2004
    Location
    Pennsylvania, YEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
    Posts
    349
    Count me in!
    68 Classic CF59529
    RTULEPRO VV05455

  15. #15
    Join Date
    Oct 2007
    Location
    Denver
    Posts
    182
    I'll send mine, to date unfired, in as well for the "upgrade", just in case.

  16. #16
    Join Date
    Dec 2009
    Location
    WISCONSIN
    Posts
    304
    having mine reanoed can you please ship 1 THANK YOU GHOST

  17. #17
    Join Date
    Oct 2008
    Location
    Winter Springs Fl
    Posts
    230
    Everyone that has a mm09 body can send it back for the washer upgrade free of charge .

    You pay shipping to me and i will pay to ship it back to you when its done .

    The washers should go on the machine on the 1st or 2nd of December .

    Happy Turkey Day pplz ! !

  18. #18
    Join Date
    Sep 2003
    Location
    virginia
    Posts
    336
    May I be the first to say that you rock sir!

  19. #19
    Join Date
    Feb 2003
    Location
    Pullman :)
    Posts
    710
    Quote Originally Posted by robertsr1811
    May I be the first to say that you rock sir!
    DITTO!

  20. #20
    Join Date
    Jul 2008
    Location
    Massachusetts
    Posts
    551
    Zoom- you never really responded to my question, likely because it skipped threads. I have yet to have my mag anno'd. Is it possible for me to have this press fit done at a later date when things are all wrapped up?

  21. #21
    Join Date
    May 2007
    Location
    Fox Paintball Territory
    Posts
    779
    Quote Originally Posted by ZoomZ@PTP
    Everyone that has a mm09 body can send it back for the washer upgrade free of charge .

    You pay shipping to me and i will pay to ship it back to you when its done .

    The washers should go on the machine on the 1st or 2nd of December .

    Happy Turkey Day pplz ! !

    Any update on the timeframe? Did the washers go as planned? The sooner I ship the sooner I play again. Thanks for any updates!

  22. #22
    Join Date
    Oct 2008
    Location
    Winter Springs Fl
    Posts
    230
    Yes Drix , when ever your finished with the ano , send it in .

    It looks like they washers will go on the machine wensday :/

    I wasnt fast enough to get them setup on the machine before my shop foreman started running a 1k pc run of firearms parts .

  23. #23
    Join Date
    Dec 2007
    Posts
    358

    3 inbound

    I will send you my 3 bodies sometime in the not too distant future.

    Swamp

  24. #24
    Join Date
    Nov 2001
    Location
    Expendable Goons, Cheap!
    Posts
    3,314
    I have a body to send in once washers are made. Watching this thread.

  25. #25
    Join Date
    Apr 2009
    Posts
    274
    Quote Originally Posted by vf-xx
    I have a body to send in once washers are made. Watching this thread.

    Same here.

  26. #26
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,428
    Quote Originally Posted by vf-xx
    I have a body to send in once washers are made. Watching this thread.

    me too...thanks Zoom

  27. #27
    Join Date
    Oct 2008
    Location
    Winter Springs Fl
    Posts
    230
    Slight delay .



    I started feeling bad mid week last week but kept pushing and ended up in the
    ER so now im sitting on the couch with my laptop instead of being at work like i should be

    Im on meds now and should be back at work in a couple day and will get back on this at the end of the week

  28. #28
    Join Date
    May 2008
    Location
    San Jose, CA
    Posts
    926
    Dude feel better

  29. #29
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,428
    yeah man..just get better!!!

  30. #30
    Join Date
    Oct 2009
    Location
    McHenry, IL
    Posts
    533
    That sucks. I hope you feel better, soon. It's no fun being sick any time of the year, let alone around the holidays.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •