-
Remote Question
So I am running a remote through a QD right into the valve. works great but had to ask is there any problem doing this?. There is a small leak but I believe the male QD is a dinged.
Thanks
-
I've done it before and it usually works just fine. Check the o-ring in the female side if your getting a bit of hiss under pressure. Might just be that I'm rough on equip, but I seem to have to replace my QD rings at least once a season.
-
Post a picture of your setup. I would recommend adding a slide check or replacing the q/d with a proconnect. Its also more comfortable to have the remote run off a bottom line.
One of my q/ds leaks when it is torqued to either side. The o-rings are fine, but its a loose fit and any movement/play will create a leak. But most of my q/ds are super tight.
I also recommend a fill whip.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules