Results 1 to 6 of 6

Thread: hyperframe problem

  1. #1

    hyperframe problem

    Just put on a hyperframe on my gen 2.5 micromag body with xvalve and ult, which had been working fine with a mech frame. When i gas the marker up it leaks like crazy down the barrel. On/off problem, maybe something to do with the sear? There is probably a thread somewhere, but i thought i would just ask. Any help would be great thanks.

  2. #2
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,235
    Try removing some of the shims from the ULT.

    Is the rail bushing in place?
    Except for the Automag in front, its usually the man behind the equipment that counts.

  3. #3
    ill give removing some of the shims a try. I was under the impression micromags didnt ahve rail bushings, i could be wrong?

    Quote Originally Posted by athomas
    Try removing some of the shims from the ULT.

    Is the rail bushing in place?

  4. #4
    Join Date
    Aug 2005
    Location
    Ocala, Florida
    Posts
    1,283
    You are correct a micromag doesn't need a rail bushing (unless someone has modified it). Did you use the same sear when you put on the hyperframe if not thats where I would look first .

  5. #5
    I'm waiting on air right now, but the sear actually came with the hyperframe.

    Quote Originally Posted by Coralis
    You are correct a micromag doesn't need a rail bushing (unless someone has modified it). Did you use the same sear when you put on the hyperframe if not thats where I would look first .

  6. #6
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,235
    Quote Originally Posted by WileyPB
    I was under the impression micromags didnt ahve rail bushings, i could be wrong?
    You are correct. I had minimag on the brain.

    The sear probably allows the bolt to sit farther forward. That means you will need to use a shorter powertube spacer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •