Problem with Doc's Machine Automag to Autococker barrel adapter

[yamess191]

I am having a problem with Doc's automag to autococker barrel adapter and was wondering if any one else has had the same problem. The paintball dont feed all the way through the feed hole in the barrel. They are getting hung up because the hole that Doc machined for the feed hole is to small in diameter. I have tried every kind of paint my local shop carries and none of it feed through. I have to push them in with my finger with considerable force to get them in the breach. Am I the only one who has had this problem? I e-mailed Doc yesterday and have not heard back.

[BigEvil]

Good luck with that one buddy.

Best bet is to try to ream the hole out bigger.

[yamess191]

Yea, I thought about reaming the feed hole out bigger, though it is stainless which is a pretty hard metal. I was hoping to hear back from doc, and wondered if anyone else has had this problem.

[Spider-TW]

I have one that was small. If you catch Doc at the right time, he will take care of it.

Mine was too large for my old body (.999 for a .996 body iirc). I got it fitted up and found that even some silly small custom paint was too big for it. The barrel threads were tight too, and I emailed him to let him know that it looked like all the dimensions looked a few thousandths short. Doc had me ship it back and he bored it out for me.

[yamess191]

It is good to hear that Doc takes care of his customers. I will e-mail Doc again if I don't hear from him tonight.

[Hook]

I've contacted Doc several times before and if you don't hear back from him within 24-48 hours, simply re-send your email and he'll get back to you. He's a great guy to deal with.

And back on subject, knock on wood, because I have two of doc's twistlock adapters and both are fine.