Results 1 to 22 of 22

Thread: New Universal Board!!! The "Uni-Pro" (Beta)

Hybrid View

  1. #1
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,488

    New Universal Board!!! The "Uni-Pro" (Beta)

    REFLEX PAINTBALL CUSTOMS is proud to introduce the newest family member to our already growing electronic product line

    The REFLEX PAINTBALL CUSTOMS "Uni-Pro"



    A new Universal board that combines features desired by the "Do-It-Yourselfer" and the "Tinkerer" in all of us



    A size comparison against the UTB and a Paintball



    The Uni-Pro is a very unique product bringing some much desired advancements over its predecessors such as the Morlock and Universal T-Board (UTB)

    - Multicolor LED is used for board status and programming mode adjustments. The multicolor LED also serves to mount the board in position if the board is placed in the rear of the trigger frame. (this is what the board is primarily designed for, though it will fit on other locations too).

    - OLED screen: yes, this board will be developed with the intent that for future use in the product, it can control an OLED screen

    - Multi-color LED mount: the way you see the LED in the pictures was mounted for programing and testing purposes. The LED can be moved to the back of the board or removed and a jumper soldered on for remote LED location,.. there are options!

    - Multiple Power switch options: You guys that have the VER and Logic Ripper frames will know what Im talking about here. The UTB "single button" software isnt really true "single button". You have to trick the board into thinking its using a button when you have a slide switch. The Uni-Pro needs no code change or weird manipulation of hardware to turn the board on. If you use a momentary button (Like the UTB does), simply turn the dip switch located on the main board next to the tourney lock "on". If you use a slide switch (like the morlock did) turn the dip switch "off". The same code works for both switches types!

    - Improved Header design: With both the UTB and the Morlock, there was area for improvement with the way you plugged in your components. The Morlock lacked polarity correction. The UTB lacked strength in the wire gauge. The Uni-Pro corrects the polarity issue by keeping ALL of your negative wires on the bottom of the board. All the positive and signal wires are on the top. This means that even if you are color blind, you can at least know what side of your header is bottom and top! The UTB had a very small and fragile wire harness with smaller wires coming from it. The Uni-Pro uses larger gauge wires and a 2mm header setup like the Morlock did, as well as bundling the components together in grouped header sets. This adds to the ease of installation when working on a custom install.

    - Compatible with the following solenoid configurations:
    1. Single-solenoid, open bolt markers (compatible with virtually all markers, however some may require special programming).
    2. Dual-solenoid, closed bolt markers (Excalibur, electronic Autococker, Sovereign, pre-2003 Shocker).
    3. Single solenoid, closed bolt marker (Nova, Mayhem, Epic, etc).

    - Compatible with all types of intellifeed including Warp feeds, Revolution intellifeed, and RF transmitters.

    - Able to operate any solenoid small enough to be useful in a paintball marker, according to published specifications. However, some solenoids may require the use of an additional capacitor.

    - Use any power source between 6 and 26 volts.

    - Compatible with E/X-Mag rechargeable battery and solenoid.

    - Power saving circuit draws minimal power while the marker is not in use.

    - 20-MHz micro controller allows for fine adjustment of firing parameters.

    - Board settings are saved in non-volatile memory, which remains available for years (decades) with no power connected.

    - On-board tournament lock, disables programming mode when locked.

    - One mounting screw hole is present on the board. Recommended screw size is 4-40 or 4-48 thread (not shown in the proto-type)

    - Compatible with both beam-break and reflective eyes.

    - Eye test mode available for both beam-break and reflective eyes.

    - Adjustable analog eye sensitivity (for both eye types). Visible "laser" eyes standard.

    THERE IS NO PRICE SET FOR THESE YET!

    We will issue a target price once we work out the software development for the OLED screen.

    When can you get one?
    No time soon. We have other products that require our attention at this point. Once they have shipped we will release some more information.
    _______________________
    Jai "P8ntbal4me" Menard

  2. #2
    Join Date
    Oct 2004
    Location
    Daniel Island, SC
    Posts
    1,466
    hmmm was just wondering about a board for a mayhem.

  3. #3
    Join Date
    Apr 2010
    Location
    Near Toronto, Canada
    Posts
    567
    VERY cool!

  4. #4
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,925
    I got to see this thing in person, and having messed with this type of thing for a long time all I can say is O M F G!

    I am considering becoming a dealer for these. This should be huge.

  5. #5
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,925
    You should also consider changing the name to the "Reflex Universal Board", or "R.U.B." for short. Then you can say "Come RUB one out"

  6. #6
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    ^^Lol that funny crap right there. Lmao. ^^

    Great product and just in time to replace the no longer produced UT.

  7. #7
    I see a PIC, mystery IC, two caps, two diodes... and a few passives.

    What's used to switch the solenoids? I'm not aware of any PIC that can source the ~200mA a MAC requires.

    Is other IC a linear regulator?

    How are programming features changed? e.g. ROF, Ramping, dwell, debounce, etc? Will the OLED be required for these changes?

    Will the software be open source like the UTB? (...was?) Where did the Scenario Dreams go?

  8. #8
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,488
    Quote Originally Posted by Poe
    I see a PIC, mystery IC, two caps, two diodes... and a few passives.

    What's used to switch the solenoids? I'm not aware of any PIC that can source the ~200mA a MAC requires.

    Is other IC a linear regulator?

    How are programming features changed? e.g. ROF, Ramping, dwell, debounce, etc? Will the OLED be required for these changes?

    Will the software be open source like the UTB? (...was?) Where did the Scenario Dreams go?
    So many questions:

    Q: "What's used to switch the solenoids? I'm not aware of any PIC that can source the ~200mA a MAC requires. "

    A: Specifically we are using MOSFETs to move the solenoids. Both are independent of each other.
    We originally had the negative ground gated but because the warp feed and most RF modules work with a +5 volt logic, we changed the circuit to accommodate everything you should want.

    Q: "Is other IC a linear regulator?"

    A: we omitted the regulator for programming purposes last week. I dont want to get into the specifics of it,... but yes,.. there is a missing IC,... intentionally done

    Q: "How are programming features changed? e.g. ROF, Ramping, dwell, debounce, etc? Will the OLED be required for these changes?

    A: There are going to be 2 software variations (so far,.. we are EARLY in the programming phase so take this all with change) One version will work with the RGB LED. The second software version will work with the OLED screen. Our HOPE is to use one version for BOTH options.
    The programming has to reflect the interface you are given to control the board with. So with either an LED or OLED screen,.... the software will interface through that.

    Q: "Will the software be open source like the UTB? (...was?) Where did the Scenario Dreams go?"

    A: The software is not open source. I belongs to us. There was only 1000 UTBs made. I have bought 300+ of those 1000. To this date I am the largest purchaser out of all sales SD has done for UTBs.
    I know you cant get more after the 1000 are gone. SD has taken the dealer accounts away.
    They are getting away from the paintball venue.

  9. #9
    Join Date
    Aug 2003
    Location
    www.BigEvilOnline.com
    Posts
    2,488
    The boards went out to the software engineer today.

    Hope to be testing something in a few months

  10. #10
    this is a cool idea I cant wait to see the oled version.

  11. #11
    Join Date
    Jul 2011
    Location
    United Kingdom
    Posts
    347
    Would be interested in getting one of these depending on price

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •