Page 1 of 2 12 LastLast
Results 1 to 30 of 50

Thread: Going To Scrap Parts!! Buy Now!

  1. #1
    Join Date
    Jul 2005
    Posts
    944

    Going To Scrap Parts!! Buy Now!

    UPDATE!! DEADLINE FOR ORDERS WILL BE MIDNIGHT WEDNESDAY SEPT 12TH!!

    Tomorrow I am going to start going through the warehouse and scrapping as many old parts as I can. I am going to start an area getting our stuff ready. Once it is ready it is going to the scrap metal yard. So if you want anything you better speak up. We will no longer build certain parts and I am not going to have them sitting in my warehouse any longer either.

    I will take pics along the way and if you want it you better take it now. I will give 2 days from the time I post, then it is out of here!!

    Everything is as is, no refunds, no whining.

    I will still need to add shipping


    Here is the start:

    Also didn't get a pic but have Stock M98 and A5 barrels 100+ of them. $5.00



    automag and RT mini and a couple full size foregrips in dust black $5.00




    VMX body kit, will have powerfeed, backdoor, brass side plug and trigger guard with extra body no extra powerfeed, backdoor, brass plug or trigger guard $20 or for $35 you can get the extra powerfeed backdoor, brass plug, and trigger guard.

    The VMX body kit may not be 100% compatible with all VM69/PMI3 internals as there were multiple changes made over several years of production of these guns. We have found that the use of a siphon tank is optimal under most conditions for virtually all Vm68/PMI3 internals.

    Because the VMX is shorter than the standard gun it requires that the frame rail be cut down to fit. We do have a limited number of shortened trigger frame rails available for $10.00 each. We also have a limited number of new complete trigger rail assemblies available in both shortened and full length with all internal components for $50.00 (These are not on our scrap list and if they don't sell will go back to the regular price, big savings now just check the website) You will also need an Armson ball detent for $7.00 if you don't have one.

    Other than that you can swap your internals for a working gun. We also have a limited number of our Pro Shot Kits which will require an Automag bolt spring for $15.00.



    Stock Spyder imagine barrels $3.00, right rails $3.00, bolts $3.00, and bottomlines w/hose and foregrip $5.00



    Automag foregrips and in my hand is the last 3 gas thrus $7.00



    Stock M98 and A5 bottom lines w/hose and CA reducer $5.00



    VM trigger guards $3.00



    The top half of the pic is RT foregrips the bottom half of the pic is RT gas thrus $7.00



    VM barrel nuts $3.00
    Last edited by Tracy_ptp; 09-08-2012 at 06:27 PM.

  2. #2
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    Forrest ask me awhile back about working on some cocker bodies he had. I sent him a private message and have not heard back from him. Please have him log on and check that pm.
    It would be a shame to scrap them..

  3. #3
    Join Date
    May 2007
    Location
    Fox Paintball Territory
    Posts
    779
    This seems like a great opportunity at the right time.

    PTP donates extra scrap parts to reliable resaler on AO. Resaler covers shipping for PTP. Then recovers costs by posting items on AO with the primary purpose of funding the Save AO Fund.

    Easy for PTP to eliminate stock. Good fundraiser for AO.

  4. #4
    Join Date
    Apr 2010
    Location
    SODAK
    Posts
    4,795
    throw some pics up of what you are scrapping,
    i may be interested in much stuff.

  5. #5
    Join Date
    Feb 2011
    Location
    I.E. ca
    Posts
    1,070

    Oooooh boy

    Gonna have to crack the piggy bank

  6. #6
    Join Date
    Jul 2005
    Posts
    944
    I will be selling the scrap. If you want to buy any of "so-called" scrap cheap cheap cheap then you can. There will be a small window in which to do so. So keep your eyes peeled. 2 days from when I post is all!!

    We are cleaning things up and gearing up especially for the Armson sights and getting our Nuclear license to put tritium in the sights. I can not have anymore clutter. We are getting ready for our state inspection.

  7. #7
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    So you wont talk to Forrest for me about the Cocker bodies?

  8. #8
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by luke
    So you wont talk to Forrest for me about the Cocker bodies?
    Yes I will, we are not scrapping those. They will be built into something special.

  9. #9
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    Quote Originally Posted by Tracy_ptp
    Yes I will, we are not scrapping those. They will be built into something special.

  10. #10
    Join Date
    Oct 2006
    Location
    SE WI
    Posts
    884
    Interesting, subbing to the thread

  11. #11
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,199
    in

  12. #12
    Join Date
    Sep 2002
    Location
    Live Free or Die
    Posts
    2,330
    Im might be interested. Also would like to know if the stuff is in your Maine facility or your Florida facility.

  13. #13
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by cougar20th
    Im might be interested. Also would like to know if the stuff is in your Maine facility or your Florida facility.
    Maine - need to clean up and re-organize the warehouse. Too much stuff.

  14. #14
    Join Date
    Sep 2004
    Location
    time to make a slurpee!
    Posts
    1,986
    Posting to subscribe. . . .interested the parts list or pics!

    Standing by. . . . . .


  15. #15
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,555
    All right, a nukyler sale!

  16. #16
    Join Date
    Jul 2005
    Posts
    944
    My first post has been updated

  17. #17
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,555
    Quote Originally Posted by Tracy_ptp
    automag and RT mini and a couple full size foregrips in dust black $5.00
    I'll take the two full size grips.

    Any info on the barrels like "bull", "ported", smooth or rifled? I could use a couple of bull barrels.

  18. #18
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by Spider-TW
    I'll take the two full size grips.

    Any info on the barrels like "bull", "ported", smooth or rifled? I could use a couple of bull barrels.
    Full size grips for mag or RT or you just want them?

    I will be going to the office tomorrow to work on this. I will take a pic of the barrels. I just know they were the stock ones that came on the M98 and A5

  19. #19
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,555
    Quote Originally Posted by Tracy_ptp
    Full size grips for mag or RT or you just want them?

    I will be going to the office tomorrow to work on this. I will take a pic of the barrels. I just know they were the stock ones that came on the M98 and A5
    That one in the upper right hand corner with the big opening in the bottom is the style I was looking for. It looked like the odd ball, that's why I thought it was the "couple' you were talking about. I would take two of those. Sorry, AM style if you have both.

    A couple of plain barrels will do too. I need some tinker stock.

  20. #20
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by Spider-TW
    That one in the upper right hand corner with the big opening in the bottom is the style I was looking for. It looked like the odd ball, that's why I thought it was the "couple' you were talking about. I would take two of those. Sorry, AM style if you have both.

    A couple of plain barrels will do too. I need some tinker stock.
    I will let you know tomorrow what I have for the full size. I did not count anything and I will also take pics of the barrels so you can choose as I have A LOT!!

  21. #21
    Join Date
    Aug 2001
    Location
    WI.
    Posts
    1,334
    I'll take the VMX body kit
    BEZERKERS
    ALL MAG SHOOTING TEAM

  22. #22
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by wimag
    I'll take the VMX body kit
    ok

  23. #23
    Join Date
    Aug 2001
    Location
    WI.
    Posts
    1,334
    Quote Originally Posted by Tracy_ptp
    ok

    your pm's are normally full so PM me the best way to get a hold of you via email and a paypal address once you have the shipping cost factored in for a total cost.

    Thanks

  24. #24
    Join Date
    Dec 2006
    Location
    SoCal
    Posts
    2,245
    Quote Originally Posted by wimag
    I'll take the VMX body kit
    Nice pick up...

  25. #25
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by wimag
    your pm's are normally full so PM me the best way to get a hold of you via email and a paypal address once you have the shipping cost factored in for a total cost.

    Thanks
    Sorry!! I cleaned out my folder. PM me your zip code and I will get a shipping cost!!

  26. #26
    Join Date
    Aug 2001
    Location
    WI.
    Posts
    1,334
    Quote Originally Posted by Tracy_ptp
    Sorry!! I cleaned out my folder. PM me your zip code and I will get a shipping cost!!
    info sent

  27. #27
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    If you come up with another VMX body let me know!!!

  28. #28
    Join Date
    Jul 2005
    Posts
    944
    Quote Originally Posted by BigEvil
    If you come up with another VMX body let me know!!!
    I have 100's

  29. #29
    Join Date
    May 2010
    Location
    Carlisle, PA
    Posts
    179
    Quote Originally Posted by Tracy_ptp
    Yes I will, we are not scrapping those. They will be built into something special.
    Wait.. You still have some of the Micro Halfblock cockers?

  30. #30
    Join Date
    Aug 2001
    Location
    WI.
    Posts
    1,334
    Quote Originally Posted by Tracy_ptp
    I have 100's
    nice. Change my order to two kits. PM'd you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •