Results 1 to 7 of 7

Thread: 68 classic valve trigger pull

  1. #1

    68 classic valve trigger pull

    I started working on a pneumag project a week or two ago. After a good hollowing out of the frame, i was able to assemble a functioning mockup before i go to work on the aesthetics. Looks like even at max lpr output, there isn't enough pressure from the trilogy solenoid to consistently trip the sear. (it'll probably fire reliably around 3-4 bps)

    So i'm assuming my options are, get more pressure (which i'm sure would blow the noid) or lighten the trigger pull.

    After finding out that ULT kit from the ADG site is apparently not compatible with the 68 classic valve, I'm wondering what people do to lighten the pull with the classic valves?

    Last edited by Tachiro; 09-13-2012 at 08:31 AM.

  2. #2
    Join Date
    Mar 2009
    Location
    Beaumont,Tx.
    Posts
    997
    I have used a ULT in a classic valve for a spydermag project. You could also use a CenterFlag on/off if you could find one.

  3. #3
    The RT Pro on/off will cut the trigger pull weight in half or more, and it's a drop-in replacement to the classic on/off.

  4. #4
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    Different LPR would probably work wonders.

  5. #5
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,351
    ULT in a classic valve works fine but not with a manual trigger pull unless tuned really well. The ULT works well with an electronic frame and I suspect it will work well with a pneumatic frame too.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  6. #6

    woo!

    Well that's what i get for assuming creating a new post automatically subscribes me to it. Came back to find all these replies. Will report back with which plan i went with, thanks AO

  7. #7
    Join Date
    May 2007
    Location
    a wretched hive of scum and villainy
    Posts
    556
    I have that exact solenoid working with a classic valve with an RT on/off
    its requires the lpr to be set near max for the noid (it says its rated to 120 psi but I think its closer to 100psi) but it has no problem outshooting the valve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •