Results 1 to 29 of 29

Thread: new sleeper reg "from" PPS

Hybrid View

  1. #1
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    616

    new sleeper reg "from" PPS

    I've been staring at threads all day...

    Hills sleepy EP mag, post from Renie and KNM about hidden LPRs
    http://automags.org/forums/showthread.php?t=261839
    http://automags.org/forums/showthrea...ighlight=renie
    http://automags.org/forums/showthrea...ighlight=renie

    pouring thru drawing I've sketched and sent to Renie and Forest about the same subject...


    so i called Craig at PPS, we talked a bit and now i'm submitting plans to him for this very project. I was wondering who would like one? i need a list after i get the go ahead from Craig

    i'm trying to keep the design as simple as possible
    i'm thinking "gas thru" like, taking an AKA sidewinder profile and having two separate outputs one high one low pressure, no tank threads on top just a flat mount like a regular asa with two screw holes from the rail


    if anyone has CAD skills to lend please do!!!




    PNEUMAG REG

  2. #2
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    616
    how do i insert this image?

  3. #3
    Join Date
    Oct 2009
    Location
    McHenry, IL
    Posts
    533
    Quote Originally Posted by rukh013
    how do i insert this image?
    You need to host the image somewhere else.

  4. #4

    iPhone 4s

    Quote Originally Posted by rukh013
    how do i insert this image?

  5. #5
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    616
    thanks

  6. #6

    Talking De nada

    Quote Originally Posted by rukh013
    thanks
    Your very welcome

  7. #7

    Haaa

    Quote Originally Posted by rukh013
    how do i insert this image?
    Put a little lube

  8. #8
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,199
    Now there's a guy that can design an LPR.

    Nice plan, but I really don't want one. I would have to build a whole 'nuther EP mag for it. My EP with a micro-rock is one of my favorites. This would be painful to pass up. Fortunately, p8ntbal4me isn't selling his uni-pro yet, so I will blame him.

  9. #9
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    4,659
    As always, comes down to cost. PB funds are pretty low for the foreseeable future, but hopefully that will change at some point. I'm guessing that is Palmers goes through the effort of making something like this, they'll either stock them or make them available for special order.

  10. #10
    Join Date
    Sep 2004
    Location
    time to make a slurpee!
    Posts
    1,637
    Quote Originally Posted by OPBN
    . . . .I'm guessing that if Palmers goes through the effort of making something like this, they'll either stock them or make them available for special order.
    Yeah. . . . .and they won't be cheap either!

  11. #11
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    616
    Quote Originally Posted by OPBN
    As always, comes down to cost. PB funds are pretty low for the foreseeable future, but hopefully that will change at some point. I'm guessing that is Palmers goes through the effort of making something like this, they'll either stock them or make them available for special order.
    That's why I posted the idea here... if this is simple enough/looks good for everyone, we can put together a list for how many for PPS to make and the price goes down

    I said I would get 5 if the price was less than $100

  12. #12
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    Quote Originally Posted by Spider-TW
    Now there's a guy that can design an LPR.

    Nice plan, but I really don't want one. I would have to build a whole 'nuther EP mag for it. My EP with a micro-rock is one of my favorites. This would be painful to pass up. Fortunately, p8ntbal4me isn't selling his uni-pro yet, so I will blame him.
    What design? I see a tube with holes. I like it but the issue will be getting a large enough passage for the HP air to feed an X-valve with this design. Which is why I never tried to make one shaped like this. I am not saying it is not possible but with difficulty comes cost. I just dont see this design being possible in my head.

  13. #13
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,199
    Quote Originally Posted by hill160881
    What design? I see a tube with holes. I like it but the issue will be getting a large enough passage for the HP air to feed an X-valve with this design. Which is why I never tried to make one shaped like this. I am not saying it is not possible but with difficulty comes cost. I just dont see this design being possible in my head.
    I meant giving it over to Craig. He will either be able do it or have a very good reason why not. I was hoping to keep micro-rock guts, but concentric pressure sleeves might be larger than 7/8" unless you could thin up the internal sleeve. Eh, that's why I would like to see what Craig does.

  14. #14
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    Quote Originally Posted by hill160881
    I like it but the issue will be getting a large enough passage for the HP air to feed an X-valve with this design.
    You don't need a huge 1/4 line to feed a RT valve. Remember, we use to run Micro line which is like .080 ID. Thinner then a Q-Tip . Jay's stormwalk used 4-40 screws to seal the air passages not being used which is about the same size and have no issues RTing wiith that frame.

    I would prefer a double LP port myself, one on the top and where it's shown in the pic then you can use a 10-32 LP plug to cap which ever port your not using.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •