automag will not fire, please help !
Hi guys, my automag will not fire, I have the air on, I do feel the resistance of the trigger.
but when I pull the trigger, it won't fire.
when I de-gas it... there are still a lot of air coming out of the mag.
my tank is N2, 50ci 4500 psi... and it still has air up to 3500psi.
My MiniMag Can
Where is the air coming from when you degas. Did you turn up the velocity on the valve ? Do you have at least 650 psi going to the gun?
the air is leaking back out from the ASA when I degas.
Originally Posted by Flatliner333
and the trigger becomes soft again when there is no gas on.
I am not sure the psi set on the gun.
I had tunaman service my gun in April this year.. and have not touch it till to day.
he told me he tune up everything, and working.
thx for your reply !!
I would dis-assemble, make sure all parts are there were there 'sposed to be, then relube generously and re-assemble. Make sure your front grip and thumb screws aren't on to tight, then with the gun aired up crank up your velocity until the gun vents out the back of the reg hole, then crank it down to lower the velocity so it doesn't vent. Try test firing it then to see if it cycles.
I belive the online manual you can download says something about a 'dead trigger' too.
Are you hearing a "click" when you air up the marker? If not, adjust the field strip screw.
I would ck to see what your tank is putting out. You really need 850+ for reliability purposes. It can fire at 650 but will cause issues in some builds.
850+ is what you want.
If your tank is set high enough adj the velocity up some
THANKS everyone for the help, you guys send me to the right path. and got it fix and working again.
I did open up the mag, but everything is good as it can (from tunaman)
I took out the the trigger pin and screw it out a bit.. and boom, it's working now.
Originally Posted by Konigballer