Results 1 to 24 of 24

Thread: questions :D

  1. #1
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192

    questions :D

    *what is the thread size for the bolts in the warp feed?
    *what is the thread size of the screw that holds the emag board in?
    *how long are the screws that hold the emag board in?

    *what size are the saftey assymbly balls?
    <span style="color:#FF0000"><b>saftey balls are 3/32"</b></span style="color:#80BFFF">

    *what are the specs for the springs for the safteys in aluminum frames?
    -whats the length?
    -how much space between the coils?
    -whats the outer diameter?
    -whats the diameter of the wire the springs are made from?
    <span style="color:#FF0000"><b>Short Spring:
    7 Coils+1 (Closed End, Not Ground)
    6 Spaces
    OAL=0.240"
    Radius= 0.0425"
    Material Diameter= 0.015"
    Space Between Coils= 0.0225""</b></span style="color:#80BFFF">

    *what are the specs for the springs for the selector switches on emag frames?
    -whats the length?
    -how much space between the coils?
    -whats the outer diameter?
    -whats the diameter of the wire the springs are made from?
    <span style="color:#FF0000"><b>Long Spring:
    8 Coils+1 (Closed End, Not Ground)
    7 Spaces
    OAL= 0.330"
    Radius= 0.04675"
    Material Diameter= 0.015"
    Space between coils= 0.03""</b></span style="color:#80BFFF">

    *what size are the screws that go through the frame, rail then thread into the body(thread size and length?
    <span style="color:#FF0000"><b>10-32 thread, 7/8 inch length</b></span style="color:#80BFFF">


    *what is the size of the threading and lenght of the set screws that hold the saftey spring in on the frames?
    <span style="color:#FF0000"><b>#4/40 no longer than 1/8"</b></span style="color:#80BFFF">

    if you can answer please do.

    more questions to come as i gather them.

    thankyou for the help guys.
    KNM.

    EDIT: numbers please, i have enough automags to see the differencese in person just looking for real specs here.
    thankyou.
    Last edited by knownothingmags; 10-28-2012 at 01:27 AM.

  2. #2
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    The aluminum safety is the same as the carbon fiber safety assy. I'm not sure about the Emag....I do know the spring is a little longer IIRC.

  3. #3
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    no one else has any answers?

  4. #4
    Join Date
    Jul 2008
    Posts
    829
    The front frame screw is 10-32 thread, 7/8 inch length...

  5. #5
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    thankyou

  6. #6
    Join Date
    Aug 2006
    Location
    port st. lousey fl origin
    Posts
    2,844
    for safety springs and ball's I've always cut up grease fittings , the balls are the same size , the spring will need trimmed to taste
    I'm pretty sure the set screws are #4/40 no longer than 1/8"

  7. #7
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    just, specs please,
    ill test out the #4-40 1/8th

  8. #8
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,826
    The saftey balls are 3/32" in diameter (I measured my Intelli ball bearing) and I know where you can get a package of 100 for less than $5 (plus shipping)
    Last edited by luke; 10-09-2012 at 12:25 PM.

  9. #9
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    Quote Originally Posted by luke
    The saftey balls are 3/32" in diameter (I believe) and I know where you can get a package of 100 for less than $5 (plus shipping)
    me too.

    keep the spec comin please.

    thankyou,
    KNM.

  10. #10
    Join Date
    Sep 2006
    Location
    Mid-Michigan
    Posts
    975
    sounds like you need a decent set of calipers. I can get you most of your measurements except the emag ones. My emag is currently with tuna. I have an extra set of 0-6" mitutoyo dial calipers if your interested.

  11. #11
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    Quote Originally Posted by reckid1986
    sounds like you need a decent set of calipers. I can get you most of your measurements except the emag ones. My emag is currently with tuna. I have an extra set of 0-6" mitutoyo dial calipers if your interested.
    i have calipers,
    springs are a little harder to get the info w/ calipers.

    any more specs people are willing to give please throw them up.

    thankyou,
    Ryan M.

  12. #12
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,826
    Quote Originally Posted by knownothingmags
    i have calipers,
    springs are a little harder to get the info w/ calipers.

    any more specs people are willing to give please throw them up.

    thankyou,
    Ryan M.
    I don’t think you will get any “inside information” on springs, so I will gladly measure them for you if you want to send them to me. No charge if we can ship them back to you with another order.

  13. #13
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    Quote Originally Posted by luke
    I don’t think you will get any “inside information” on springs, so I will gladly measure them for you if you want to send them to me. No charge if we can ship them back to you with another order.
    i will send them to you with these parts im sending in.

    thankyou very much.

    Ryan M.

  14. #14
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    well never mind, just found out i lost everything tunaman just mailed me.

    havin a bad day.

    EDIT: lol just found them, in the box shipping out very soon.
    Last edited by knownothingmags; 10-09-2012 at 04:16 PM.

  15. #15
    Join Date
    Mar 2002
    Location
    VA
    Posts
    2,270
    knownothingmags: you should invest in an automag inventory specialist :-) My girlfriend seems to keep a mental note of all the paintball equipment I own

  16. #16
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    my wife doesnt like any of my hobbies. from what i have seen.

    she is coming around alittle though.

  17. #17
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    any more info?

  18. #18
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,194
    i'll bring my caliper home tonight and take apart a safety for you...


    ill pm you my pay pal addy, 20$ should do....





    j/k





    i'm poor







    its a safety from a benchmark frame... that ok?

    To leave feedback: Click seller/buyers name, Click feedback score, Click leave feedback

  19. #19
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    Quote Originally Posted by BTAutoMag
    i'll bring my caliper home tonight and take apart a safety for you...


    ill pm you my pay pal addy, 20$ should do....
    j/k
    i'm poor :
    its a safety from a benchmark frame... that ok?
    no worries i think luke is doing it for me.

    thankyou though.

  20. #20
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,194
    you sure, its no sweat off my back

  21. #21
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    5,826
    Long Spring:
    8 Coils+1 (Closed End, Not Ground)
    7 Spaces
    OAL= 0.330"
    Radius= 0.04675"
    Material Diameter= 0.015"
    Space between coils= 0.03"

    Short Spring:
    7 Coils+1 (Closed End, Not Ground)
    6 Spaces
    OAL=0.240"
    Radius= 0.0425
    Material Diameter= 0.015"
    Space Between Coils= 0.0225"
    Last edited by luke; 10-27-2012 at 01:47 AM.

  22. #22
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    thankyou again luke,
    this will help with info.

    ill update infor on first page tommorow for anyone waiting on it.

    just to reidorate Tunaman, or the Airgundesigns online store shoule be your first stop.

    thankyou,
    KNM.

  23. #23
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    updated

  24. #24
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,192
    new questions.

    thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •