Results 1 to 24 of 24

Thread: questions :D

Hybrid View

  1. #1
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,116

    questions :D

    *what is the thread size for the bolts in the warp feed?
    *what is the thread size of the screw that holds the emag board in?
    *how long are the screws that hold the emag board in?

    *what size are the saftey assymbly balls?
    <span style="color:#FF0000"><b>saftey balls are 3/32"</b></span style="color:#80BFFF">

    *what are the specs for the springs for the safteys in aluminum frames?
    -whats the length?
    -how much space between the coils?
    -whats the outer diameter?
    -whats the diameter of the wire the springs are made from?
    <span style="color:#FF0000"><b>Short Spring:
    7 Coils+1 (Closed End, Not Ground)
    6 Spaces
    OAL=0.240"
    Radius= 0.0425"
    Material Diameter= 0.015"
    Space Between Coils= 0.0225""</b></span style="color:#80BFFF">

    *what are the specs for the springs for the selector switches on emag frames?
    -whats the length?
    -how much space between the coils?
    -whats the outer diameter?
    -whats the diameter of the wire the springs are made from?
    <span style="color:#FF0000"><b>Long Spring:
    8 Coils+1 (Closed End, Not Ground)
    7 Spaces
    OAL= 0.330"
    Radius= 0.04675"
    Material Diameter= 0.015"
    Space between coils= 0.03""</b></span style="color:#80BFFF">

    *what size are the screws that go through the frame, rail then thread into the body(thread size and length?
    <span style="color:#FF0000"><b>10-32 thread, 7/8 inch length</b></span style="color:#80BFFF">


    *what is the size of the threading and lenght of the set screws that hold the saftey spring in on the frames?
    <span style="color:#FF0000"><b>#4/40 no longer than 1/8"</b></span style="color:#80BFFF">

    if you can answer please do.

    more questions to come as i gather them.

    thankyou for the help guys.
    KNM.

    EDIT: numbers please, i have enough automags to see the differencese in person just looking for real specs here.
    thankyou.
    Last edited by knownothingmags; 10-28-2012 at 12:27 AM.

  2. #2
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    The aluminum safety is the same as the carbon fiber safety assy. I'm not sure about the Emag....I do know the spring is a little longer IIRC.

  3. #3
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,116
    no one else has any answers?

  4. #4
    Join Date
    Jul 2008
    Posts
    825
    The front frame screw is 10-32 thread, 7/8 inch length...

  5. #5
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,116
    thankyou

  6. #6
    Join Date
    Aug 2006
    Location
    port st. lousey fl origin
    Posts
    2,839
    for safety springs and ball's I've always cut up grease fittings , the balls are the same size , the spring will need trimmed to taste
    I'm pretty sure the set screws are #4/40 no longer than 1/8"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •