Results 1 to 7 of 7

Thread: xvalve removal first mag

  1. #1
    Join Date
    Sep 2012
    Location
    Valparaiso IN
    Posts
    184

    xvalve removal first mag

    SORRY in advance for the dumb question. I am completely new to the AO community. I recently purchased my first AGD product an xmag and I have searched all over but I can't figure out how to get the valve out of the marker. I removed the the screw from the back of the marker and the valve will not come out. Does the trigger frame have to be completely removed or am I just missing something. I normally wouldn't post this but I have searched and I've come up with nothing.

  2. #2
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,199
    pull the trigger, the on/off pin is extended

  3. #3
    Join Date
    Sep 2012
    Location
    Valparaiso IN
    Posts
    184
    I tried the valve will not come out.

  4. #4
    Join Date
    May 2010
    Location
    Carlisle, PA
    Posts
    179
    Push in a little, twist to the right, should slide out.
    There is a little tiny tab at the bottom that goes into a groove and twists to lock it in place.

  5. #5
    Join Date
    Sep 2012
    Location
    Valparaiso IN
    Posts
    184
    It must have known you were on the case I went down there ready to try your advice took the screw out of the back and the valve all but jumped out lol so thank you very much.

  6. #6
    Join Date
    Mar 2009
    Location
    Beaumont,Tx.
    Posts
    1,280
    MOTY3
    Watcha doin to it ?

  7. #7
    Join Date
    Sep 2006
    Location
    MICHIGAN
    Posts
    349

    Comment

    Quote Originally Posted by Flatliner333
    Watcha doin to it ?
    Good to hear about your first mag. Do you have pictures of your prize?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •