questions :D

[knownothingmags]

*what is the thread size for the bolts in the warp feed?
*what is the thread size of the screw that holds the emag board in?
*how long are the screws that hold the emag board in?

*what size are the saftey assymbly balls?
<span style="color:#FF0000"><b>saftey balls are 3/32"</b></span style="color:#80BFFF">

*what are the specs for the springs for the safteys in aluminum frames?
-whats the length?
-how much space between the coils?
-whats the outer diameter?
-whats the diameter of the wire the springs are made from?
<span style="color:#FF0000"><b>Short Spring:
7 Coils+1 (Closed End, Not Ground)
6 Spaces
OAL=0.240"
Radius= 0.0425"
Material Diameter= 0.015"
Space Between Coils= 0.0225""</b></span style="color:#80BFFF">

*what are the specs for the springs for the selector switches on emag frames?
-whats the length?
-how much space between the coils?
-whats the outer diameter?
-whats the diameter of the wire the springs are made from?
<span style="color:#FF0000"><b>Long Spring:
8 Coils+1 (Closed End, Not Ground)
7 Spaces
OAL= 0.330"
Radius= 0.04675"
Material Diameter= 0.015"
Space between coils= 0.03""</b></span style="color:#80BFFF">

*what size are the screws that go through the frame, rail then thread into the body(thread size and length?
<span style="color:#FF0000"><b>10-32 thread, 7/8 inch length</b></span style="color:#80BFFF">


*what is the size of the threading and lenght of the set screws that hold the saftey spring in on the frames?
<span style="color:#FF0000"><b>#4/40 no longer than 1/8"</b></span style="color:#80BFFF">

if you can answer please do.

more questions to come as i gather them.

thankyou for the help guys.
KNM.

EDIT: numbers please, i have enough automags to see the differencese in person just looking for real specs here.
thankyou.

[Ando]

The aluminum safety is the same as the carbon fiber safety assy. I'm not sure about the Emag....I do know the spring is a little longer IIRC.

[knownothingmags]

no one else has any answers?

[correia3]

The front frame screw is 10-32 thread, 7/8 inch length...

[knownothingmags]

thankyou

[maniacmechanic]

for safety springs and ball's I've always cut up grease fittings , the balls are the same size , the spring will need trimmed to taste
I'm pretty sure the set screws are #4/40 no longer than 1/8"