Results 1 to 24 of 24

Thread: questions :D

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    questions :D

    *what is the thread size for the bolts in the warp feed?
    *what is the thread size of the screw that holds the emag board in?
    *how long are the screws that hold the emag board in?

    *what size are the saftey assymbly balls?
    <span style="color:#FF0000"><b>saftey balls are 3/32"</b></span style="color:#80BFFF">

    *what are the specs for the springs for the safteys in aluminum frames?
    -whats the length?
    -how much space between the coils?
    -whats the outer diameter?
    -whats the diameter of the wire the springs are made from?
    <span style="color:#FF0000"><b>Short Spring:
    7 Coils+1 (Closed End, Not Ground)
    6 Spaces
    OAL=0.240"
    Radius= 0.0425"
    Material Diameter= 0.015"
    Space Between Coils= 0.0225""</b></span style="color:#80BFFF">

    *what are the specs for the springs for the selector switches on emag frames?
    -whats the length?
    -how much space between the coils?
    -whats the outer diameter?
    -whats the diameter of the wire the springs are made from?
    <span style="color:#FF0000"><b>Long Spring:
    8 Coils+1 (Closed End, Not Ground)
    7 Spaces
    OAL= 0.330"
    Radius= 0.04675"
    Material Diameter= 0.015"
    Space between coils= 0.03""</b></span style="color:#80BFFF">

    *what size are the screws that go through the frame, rail then thread into the body(thread size and length?
    <span style="color:#FF0000"><b>10-32 thread, 7/8 inch length</b></span style="color:#80BFFF">


    *what is the size of the threading and lenght of the set screws that hold the saftey spring in on the frames?
    <span style="color:#FF0000"><b>#4/40 no longer than 1/8"</b></span style="color:#80BFFF">

    if you can answer please do.

    more questions to come as i gather them.

    thankyou for the help guys.
    KNM.

    EDIT: numbers please, i have enough automags to see the differencese in person just looking for real specs here.
    thankyou.
    Last edited by knownothingmags; 10-28-2012 at 12:27 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •