View Poll Results: Make a body that accepts which valve

Voters
49. You may not vote on this poll
  • Alumnium classic RT body for X valve

    24 48.98%
  • Alumnium classic RT body for stock classic RT valve

    25 51.02%
Results 1 to 30 of 67

Thread: Classic RT Aluminum ULE body/ ULE Rail Milling

Hybrid View

  1. #1

    Classic RT Aluminum ULE body/ ULE Rail Milling

    Im in the process of doing R&D on the classic RT to make it lighter, accept autococker barrels and Angel feednecks/detents.

    With a main focus on weight reduction i have made a prototype vert feed classic RT body out of aluminum and made it accept an x valve instead of doing an over the valve design that uses the stock stainless steel RT valve. I HAVE REDUCED THE WEIGHT OF THE GUN BY 1LB 1OZ SO FAR!!!!! The next phase of the R&D project is to develop ULE rail milling to reduce the weight even more.


    Is there more interest in doing a body that accepts the stock Classic RT valve? The downside is there is only a 7 ounce weight savings by doing this. The stock valve is heavy.....there are also allot of guns out there that are leaking because the bore in the rail that the banjo bolt goes through is worn out.

    Participate in the pole and let me know if you would be interested. I will do a run if we can get 15 units sold.

  2. #2
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,961
    Make them both..



    You're killing my wallet btw.

  3. #3
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,172
    Quote Originally Posted by BigEvil
    Make them both..



    You're killing my wallet btw.
    who needs money anyways.

  4. #4
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,961
    Quote Originally Posted by knownothingmags
    who needs money anyways.
    Apparently I do, if I ever plan on getting laid again. Hookers arent cheap these days.

  5. #5
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,172
    Quote Originally Posted by BigEvil
    Apparently I do, if I ever plan on getting laid again. Hookers arent cheap these days.
    mmmmhmm hookers.

  6. #6
    Join Date
    Sep 2009
    Location
    Arkansas
    Posts
    88
    Stock RT valve. If people want it sorter, charge an extra $5 to cut it off or let them do it.

    I do want one but the only thing I probably wont like is the feedneck area like on your MM bodies. I understand about the machining but I would pay more for smoother lines.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •