Results 1 to 5 of 5

Thread: Torque out of a warp feed

  1. #1
    Join Date
    Jul 2012
    Location
    Chester nh
    Posts
    483

    Torque out of a warp feed

    Is there a way to get a warp feed to push harder. I am trying to do a backpack and the warp feed needs to feed threw about 2ft of flex hose

  2. #2
    Join Date
    Jul 2011
    Location
    United Kingdom
    Posts
    347
    Tamiya make a heavy duty (high torque) 3v motor for RC models

    I've just bought a couple to upgrade a knackered halo and my warpless reloader

  3. #3
    Join Date
    Jul 2012
    Location
    Chester nh
    Posts
    483
    i dont think the motor is the problem because the discs keep spinning fine its the plats are not pushing the paintstack hard enough to move the longer paint stack. thinking of using 2 of those cheap disposable plastic containers and cutting the bottoms to the same sive as the friction discs to sct as springs and provide a little more pressure

  4. #4
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    http://www.automagsuk.com/warpfeed.html

    Scroll down to the warp feed section. Might help with your issue.

  5. #5
    Join Date
    Jul 2012
    Location
    Chester nh
    Posts
    483
    Wow how I missed that I'm not sure. Might have been the bourbon while I was scrolling the forum last night

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •