Valve Sanity Check...

[Kusokow]

Was trying to get a warm fuzzy about the different kinds of valves by searching but became more confused...Please help me out

RT Valve - Stainless Steel - Banjo Bolt (bottom air) - Stock does not accept ULT - On/Off pin .75''
RT Pro Valve - Stainless Steel - Side Air - accepts RT and ULT - On/Off Pin 0.765''
Retro Valve - Same as RT Pro Valve?
xvalve - Aluminum/Stainless Steel combo - Side Air - Accepts ULT - On/Off Pin 0.75''

Are the stainless steel valve more durable than xvalve (Al/SS)?

Wanted to basically find the equivalent of a stainless steel version of a xvalve with RT on/off

I think I am either wanting a RT Pro Valve or a Retro Valve???

The setup I had in mind:

AM/MM rail
Vert Mod SS body
RPG Triton Frame w/ viperblade
classic sear and pin
SS version of an xvalve w/ RT on/off

Any help would be greatly appreciated!!!

[OPBN]

IIRC, the Retro will not, but the RT Pro will? I know I have a retro and it will not take a ULT. Pin in mine is .75. Not sure what you mean by more durable? The Retro and RT have the SS fronts, but the regs are still aluminum just like the X's.

[Kusokow]

IIRC, the Retro will not, but the RT Pro will? I know I have a retro and it will not take a ULT. Pin in mine is .75. Not sure what you mean by more durable? The Retro and RT have the SS fronts, but the regs are still aluminum just like the X's.

By durable I mean will the xvalve be able to stand up to wear and tear as well as the stainless steel valves. (difference in metal hardness)

I'm not so concerned about the valve being able to take ULT because I plan on using a RT On/Off. I was just wondering if there is a valve that has the same recharge rate (or faster) than the xvalve and made out of entirely stainless steel. From searching around, I learned that xvalves are lighter because the air channels are milled larger but the down side is, the recharge rate is slgihtly slower than its predecessor.

Appreciate the help!!!

[OPBN]

I was just wondering if there is a valve that has the same recharge rate (or faster) than the xvalve and made out of entirely stainless steel.

Nope. As mentioned, the Retros and RT Pros hae the SS valves, but aluminum regs.

[Kusokow]

Nope. As mentioned, the Retros and RT Pros hae the SS valves, but aluminum regs.

OK. Now what is the big difference between the Retro Valves and the RT Pro Valves? Just the On/Off pin length?

[OPBN]

I beleive the RT Pros can accept ULT whereas the Retros can't. You can swap a .750 pin into an RT Pro though. The pin length is what helps with the reactivity.