Results 1 to 14 of 14

Thread: making the warpfeed run wirelessly? w/o sound activation.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    making the warpfeed run wirelessly? w/o sound activation.

    so you know how the warpfeed operates either off of sound/vibration,
    or
    if you wire up the inteliswitch you can get the warp to turn everytime the switch is tripped.

    -is there a way to do this without running wires?
    -if so please send me in the right direction.
    -if you know please post up.

    and please dont post examples of RF kits unless i can directly wire them into the warpfeed.

    thankyou,
    KNM.

  2. #2
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    There's no way to do it as of right now, at least none that I know of. Once Jai is done with the new emag boards. He going to tackle a new more advance warp board which depending on the difficulty might have RF. I'm willing to bet the RF is going to be in very limited numbers since the cost is going to almost double. I run a RF chip in my emag with my Empire loader. You might be able to run a wire from the loader to the warp which could piggy back off the signal.

  3. #3
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    8,039
    You can buy digital RF send/receive chips that can be programmed to send/receive a digital on/off signal. It would be the same as physically sending a signal on a wire from the warp point of view. They are quite inexpensive as well.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  4. #4
    Quote Originally Posted by athomas
    You can buy digital RF send/receive chips that can be programmed to send/receive a digital on/off signal. It would be the same as physically sending a signal on a wire from the warp point of view. They are quite inexpensive as well.
    are you able to kick a link up for me.

    thankyou very much.
    this sounds like what i need.

  5. #5
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,199
    bluetooth?

    or we could use wifi and a smartphone


    but seriously athomas has the idea, you could also do IR. have the trigger activate a IR LED that gets picked up by a sensor on the warp

  6. #6
    Join Date
    Sep 2002
    Location
    Boston
    Posts
    464

    Wink

    While you are at it build in a IFF mode. And then we can get an add-on that will point the direction of RF signals (ie a compass with an arrow --> Shoot here)
    Forest Gump of paintball

  7. #7
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    8,039
    Quote Originally Posted by knownothingmags
    are you able to kick a link up for me.

    thankyou very much.
    this sounds like what i need.
    Try this:

    http://www.rentron.com/PicBasic/RemoteControl.htm

  8. #8
    Quote Originally Posted by athomas
    So.if i knew anything.about this i would be money.
    athomas--- if you have time at all can you surf that page and let me know the simplest and easiest combo for sender and receiver would be?

    or just pm if you get a chance.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •