Results 1 to 3 of 3

Thread: thoughts on RT classic/mini combo

Hybrid View

  1. #1
    Join Date
    Mar 2012
    Location
    Norfolk VA
    Posts
    576

    thoughts on RT classic/mini combo

    so i've been seeking air-thru capability with a mag since i saw flatliners mag, but there seems to never be enough room, i threw around the idea of a mag with mini lowers and saw the idea pop up in a MotM entry...

    so i have pics of my plans

    here
    and here

    im able to fit without modification:
    Humphrey CRCB-0053W
    MPA-3
    microline & fittings
    LPR (all i have available is an AKA im SURE i can find a smaller one

    plumbing illustration here

    all this needs is a custom rail, sleeper asa, retreading the valve to 1/8 NPT. i was hoping to use the eye board from the mini (body milling required) and using a jumper to connect the lower and upper board, socketing the solenoid into the upper board and wiring a micro switch for trigger

    this will be mostly reversable




    so my question is where can i get a rail made to test a proto-type, i think this will be awesome?
    Who wants one?

  2. #2
    Join Date
    Mar 2009
    Location
    Beaumont,Tx.
    Posts
    913
    Is the banjo bolt smaller than 1/8 npt? If so I would try and find a straight male to female fitting that would fit the hole in the valve without modification. Good luck I hope this works

  3. #3
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,040
    I could probably make a fitting to use the existing banjo bolt and still convert it to 1/8 NPT...

    To leave feedback: Click seller/buyers name, Click feedback score, Click leave feedback

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •