Results 1 to 7 of 7

Thread: Minimag with retro valve,barrel leak and reg leak.

Hybrid View

  1. #1
    Join Date
    Oct 2005
    Location
    MiaMI FLorIdA
    Posts
    94

    Minimag with retro valve,barrel leak and reg leak.

    Soo ive been out of the seen for a while... I just picked up a mini mag with a retro valve and previous owner said it had a,level 10...

    Here I go straight to the point...

    Its leaking down the barrel and the little hole on the side of the front half of the valve..


    I want to purchase a complete parts kit for the valve to replace every oring and everything that should be changed.

    Where to buy! & which kit?

    I know of adg and tunamart but they dont offer a complete kit....

    I dont wanna,have to buy 4 of each oring.

    Thanks in advance..

    Pic of her.. She rapid fires like a beast just leaks like an asian whore.


  2. #2
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,373
    check the valve pin assembly...it could be dirty...that will cause that type of leak as well as the rapid fire? or the o-rings on the valve pin need to be changed?

    here they are at AGD:
    http://store.airgun.com/index.cfm?fu...fo&prodId=2133

  3. #3
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,235
    I concur that it is leaking due to the valve pin orings.

    Its a good idea to replace all the orings when getting a new to you mag. That way you know you are starting fresh and aren't relying on someone else's maintenance practices.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  4. #4
    Join Date
    Oct 2005
    Location
    MiaMI FLorIdA
    Posts
    94
    Sounds good. Thanks. What about the leak from the little hole on the side of the reg.

  5. #5
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,373
    thats from the valve pin assembly...it is best to rebuild the valve like athomas posted.

    new o-rings on the valve pin assembly will stop the leak...and a whole rebuild will be piece of mind

    you can try cleaning the valve and oil until your kit arrives tho!

  6. #6
    Join Date
    Jul 2008
    Location
    It's cold here.
    Posts
    206
    I had leaking out of the hole on the side of the valve today. I figured out that my trigger rod was putting pressure on the trigger. Have a little gap between the two now and no more leak.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •