Page 1 of 3 123 LastLast
Results 1 to 30 of 75

Thread: Charity Marker Build - SoCal Cure Ball

  1. #1
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566

    Charity Marker Build - SoCal Cure Ball

    Ok. If we are going to build a marker to auction off then lets get a list going.

    All proceeds of the auction will go to autismspeaks. http://www.autismspeaks.org/

    So far we have:
    --------------------------------------------
    Frame
    v2 airwalk frame - Mag79
    sleeper pnuemag conversion + bnib tickler - loguzzzzzz

    ---------------------------------------------
    Valve
    reverse mini mag valve - hill160881

    or

    X-valve w/ ULT - mag79

    ---------------------------------------------
    Foregrip/vert asa
    LPR with taped vert asa - hill160881

    or

    15* ASA & CP Foregrip - mag79

    ----------------------------------------------
    Asa on/off
    modded cp on/off - mag79

    ----------------------------------------------
    Barrel
    barrel - loguzzzzzz

    ---------------------------------------------
    Rail
    rail- loguzzzzzz

    -----------------------------------------------
    Body
    ule body w/ 1st gen killa detent - d4m4don3

    ------------------------------------------------




    What's needed:



    sear -




    Post up if there is something I forgot.

    Post up if there is something you would like to donate.
    Last edited by Smoothice; 12-20-2010 at 09:52 PM.

  2. #2
    Join Date
    Feb 2006
    Location
    Waterless Ga
    Posts
    1,450
    I'll Donate:
    V2 Airwalk Frame
    Modded CP On/Off
    15* ASA
    CP Foregrip

    John, would you be willing to do the convertion? We could all have a part in putting it together.

  3. #3
    Join Date
    Feb 2006
    Location
    Waterless Ga
    Posts
    1,450
    X-valve w/ ULT

  4. #4
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    DAMN

  5. #5
    Join Date
    Sep 2004
    Location
    time to make a slurpee!
    Posts
    1,633
    I will glady do the conversion and I have a bnib Orracle Tickler I will throw into the mix as well. I am sure I can dig up a barrel and rail. I only wish I had a ULE body laying around to toss into the mix.


  6. #6
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by Loguzzzzzz
    I will glady do the conversion and I have a bnib Orracle Tickler I will throw into the mix as well. I am sure I can dig up a barrel and rail. I only wish I had a ULE body laying around to toss into the mix.

    Alright we got multiple people offering up duplicate items...

    Best components wins I guess.

    But I hate turning down someone's generosity. So if you offer something that isn't used in this charity build maybe we could still raffle your item at the day of event. Or even build a second mag...

    So...What to do with extra donations?

    Build a 2nd "beater" mag to raffle or Parts box raffle?

  7. #7
    Join Date
    Dec 2006
    Posts
    1,616
    You could just raffle off the parts as well. I'm sure there are enough people out there that would want components too... maybe.

  8. #8
    Join Date
    Feb 2006
    Location
    Waterless Ga
    Posts
    1,450
    Quote Originally Posted by Smoothice
    So instead of a pnuemag frame you would like to do the above? Correct?
    i'll ship this stuff to John and he could do the pneumag conversion/mod, and make sure its ready to

    Quote Originally Posted by Loguzzzzzz
    I will glady do the conversion and I have a bnib Orracle Tickler I will throw into the mix as well. I am sure I can dig up a barrel and rail. I only wish I had a ULE body laying around to toss into the mix.

    pm me your address

  9. #9
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by zondo
    You could just raffle off the parts as well. I'm sure there are enough people out there that would want components too... maybe.
    Thats what i'm thinking.

  10. #10
    Join Date
    Feb 2006
    Location
    Waterless Ga
    Posts
    1,450
    Quote Originally Posted by Smoothice
    Yes send him what you have so it can be done in time.

    Just to be sure. The pnuemag frame you originally offered is now being replaced the v2 airwalk? Correct?
    Its the same frame, its untouched. I was going to do the mod but offered it to John so we could all have a part in it, so Loguzzzzzz is going to covert it into a pneumag frame.

    I think it would be best if all the parts going to this gun is sent to him so he could mod, tune, assemble and have it ready for the auction/raffle.
    Last edited by mag79; 12-20-2010 at 05:06 PM.

  11. #11
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by mag79
    the v2 airwalk frame will be turned into a pneumag frame by loguzzzzzz
    Ok. I will delete my posts to clean this thread up.

  12. #12
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    This is going well, I offered a rather nice marker if we could not put one together. I will donate it anyway but this could turn out better than i was expecting.

    Any other takers we still need a body and sear

  13. #13
    Join Date
    Feb 2006
    Location
    Waterless Ga
    Posts
    1,450
    I have sears, rt and mm/am

  14. #14
    Join Date
    Aug 2004
    Location
    Left Coast Currently
    Posts
    2,457
    I've got a classic body as well as the sear and pin... A rail as well...

    DM

  15. #15
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134
    I am donating a marker made by Mag79 but if any of the parts i have listed are still needed there still in, because they are extras i got laying around.

    Loguzzzzzz will you be in davis on the first? I need a someone familiar with pneu mags to tune it before the auction.

  16. #16
    Join Date
    Dec 2006
    Posts
    1,616
    Quote Originally Posted by hill160881
    I am donating a marker made by Mag79 but if any of the parts i have listed are still needed there still in, because they are extras i got laying around.

    Loguzzzzzz will you be in davis on the first? I need a someone familiar with pneu mags to tune it before the auction.
    the black and white minimag?

  17. #17
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by zondo
    the black and white minimag?

  18. #18
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134

  19. #19
    Join Date
    Dec 2006
    Posts
    1,616





    Last edited by zondo; 12-20-2010 at 08:17 PM.

  20. #20
    Join Date
    Aug 2004
    Location
    Elm City NC
    Posts
    96
    Wow this is pretty awesome guys, gonna go through my parts to see if I've got anything to offer wish I could attend the event.

  21. #21
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by d4m4don3 View Post
    I've got an old ule body here. The detent has seen better days its a 1st gen killa detent.
    http://www.bigevilonline.com/showthr...ed=1#post62367



  22. #22
    Do you need RT Pro sear and pin or classic sear and pin? If it's RT Pro I got you covered

  23. #23
    Join Date
    Apr 2005
    Location
    a toda madre o un desmadr
    Posts
    5,078

    Talking

    You know guys, were already out to def out do ourselves and we still have a month!!!

  24. #24
    Join Date
    Jan 2005
    Location
    Northern VA
    Posts
    1,100
    I'm willing to donate this, let me know!

    -----------------------
    TK's 68Automag:

    I purchased this Level 5 Automag from A-Tach who bought it from Classicmagger and this is the info he provided me.

    First Automag Level to be in Production.
    ~All Original
    ~Purchased in 1991 in the UK Brand New from Tom Kaye himself
    ~CF00714


  25. #25
    Join Date
    Dec 2006
    Posts
    1,616
    Quote Originally Posted by bunny5
    I'm willing to donate this, let me know!
    Don't you have an SFL you could donate?

  26. #26
    Join Date
    Jun 2008
    Location
    the country of california
    Posts
    1,134


    You know i would bid on that classic if it had TKs sig on it. Hint Hint Nudge Nudge.
    Last edited by hill160881; 12-21-2010 at 09:54 AM.

  27. #27
    Join Date
    Jun 2001
    Location
    Beer Country
    Posts
    662
    I"d donate a trigger, although I'm not sure it'll fit the frame.
    I'm usually up for donating for a good cause, but since my son is autistic, it means a bit more. Let me know what type of trigger fits the frame and I'll get on it.
    Dan@Triggernomics

  28. #28
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by Maghog
    I"d donate a trigger, although I'm not sure it'll fit the frame.
    I'm usually up for donating for a good cause, but since my son is autistic, it means a bit more. Let me know what type of trigger fits the frame and I'll get on it.
    Dan@Triggernomics
    Not sure on trigger for an airwalk. I bet loguzzzzzzz would know. Maybe a agd spec trigger would be easier and it could be auctioned off here?

  29. #29
    Join Date
    Nov 2006
    Location
    Mag shooter since '96 - S
    Posts
    4,566
    Quote Originally Posted by hill160881


    You know i would bid on that classic if it had TKs sig on it. Hint Hint Nudge Nudge.
    I will get in touch with TK right now. Maybe we can make that happen

  30. #30
    Join Date
    Oct 2003
    Location
    Don't know, I am lost.
    Posts
    2,987
    Quote Originally Posted by Smoothice
    I will get in touch with TK right now. Maybe we can make that happen
    Thats done. Next.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •