Never tuned a Mag before. Help me please.

[blacklegionfreak]

Yo. I have a ULE Xvalved mag. I want to play paintball with it- but its god awful need of a tuning and dont know how to do it. I have a 68/3000 tank right now idk what the output is but my gun is rt-ing like a mad man when i barely touch the trigger (it may have a ULT in it) when i stop it takes a second for the valved to reset.... HELP thank you oh so helpful people.

[captian pinky]

im sure if you end up heading to paintball charleston geoff can get it set up pretty quick. your best bet would be to call and ask.

[Ando]

If you have shims in your on/off, you have a ULT. Pull all your ULT shim out and see how it goes from there, then add shims to taste.

Send some oil through the marker too. That usually fixes most issues.

[blacklegionfreak]

thanks everyone:

I did check them out and those helped considerably. I found out that I am in need of an RT parts kit so I ordered one I ordered a couple things when I took it apart I found out that the I need a few things. Something else I was thinking after reading off of the AGD store was that my on/off may be the wrong one becuase this Xvalve was originally on an RT Pro. Also when i took it apart the reg springs were coated in som nasty thick grease. so i cleaned all the inards as best I could. and the I think i lost a reg seat o-ring when i took it apart and also i found one was cracked.

Pinky:
Ive I cant get it working I may go up there for a day with a friend a play a bit i will definately hit you up if i go though. thanks!!

Ando:

Thanks i will do that, I will have pictures up tonight
she is one sexy gun

thanks everyone

[athomas]

The grease on the springs is only to keep them from rusting. Clean it off and reapply some good quality grease.

The on-off pin should be 0.750" for your gun.

[blacklegionfreak]

I Think it has a ULT trigger pull kit on it- is it possible to put the ULT on a Classic 68 valve, and use the on off from the classic on my x valve?