*PRE-ORDER*Aluminum Automag RT Classic Bodies....RT and X valve versions.rail milling

**Xmagterror** · 01-06-2013, 08:46 PM

Prototype parts for both versions have been made and tested and now its time to start the pre-order! I will only be doing ONE run of these bodies and only in a pre-order.

We need to sell a combined total of 15 bodies to make this run happen. Bodies will take aprox 6-8 weeks to machine..

Paypal your despoit to camarogod98@hotmail.com >>>MAKE SURE YOU INCLUDE YOUR AO NAME AND WHAT YOU ARE BUYING WITH YOUR PAYMENT...VERY IMPORTANT.....Rail milling and barrel autococker threading service can be done at any time...you can send those parts to me now if you like....PM me for details.

You must paypal me a deposit to get your name on the list.....Mailing me your deposit in the form of a money order is fine also! PM me for details

Aluminum Automag RT classic body...(this body only works on the original automag rt and will not work on any other automag.)....$200 ($50 down to get on the preorder list)
This is a direct bolt on body and uses the stock RT valve.
Body Features:
-Vertical feed threaded for use with angel feednecks
-Dual angel detents
-Uses autococker barrels
-less than half the weight of the stock body for serious weight reduction!!!!!!!

Aluminum Automag RT classic body...for use with X valve.....$200($50 down to get on the preorder list)
-Vertical feed threaded for use with angel feednecks
-Dual angel detents
-Uses autococker barrels
-using this body with ULE rail milling and an x valve cuts 11oz. off the weight of the gun!!!!!!
-Included special adapter bushing for rail and grip frame.
-Requires the below ULE rail milling

ULE milling for classic RT rail....this milling is necessary to make the classic RT accept the X valve. reduces the weight of the rail by 30%..(you can send your rails at anytime....I can also mill your automag RT rail even if you dont want an aluminum body)....$50

Autococker barrel threading service for twist lock barrels.....$35
For those that have special anno barrels and would like to get them threaded to fit their new body

Shipping:$12

ULE Bodies for Emag and automag with RT style front.
Body Features:
-Vertical feed threaded for use with angel feednecks
-Dual angel detents
-Uses autococker barrels
-$200

Bodies do not include feednecks or detents. Pre-order down payment is non refundable (money is used to buy material, supplies to manufacture parts)....You can sell your spot to someone else if need be.

**Xmagterror** · 01-06-2013, 08:49 PM

Pre-order List

Aluminum Automag RT Body
1.Big Evil.........Paid in full!!!.......SHIPPED
2.bbotts77..........Paid in full!!!........Barrel Threading
3.Sea_Chip..........Paid in full!!!........Barrel Threading
4.RST
5.RT Lover........Paid in full!!!!.......SHIPPED
6.tolar250........Paid in full!!!!.......SHIPPED
7.Pgop2.0..........Paid in full!!!.......SHIPPED
8.dboggs79.........Paid in full!!!.......SHIPPED
9. Swamphawk7..........Paid in full!!!......SHIPPED
10. mbt..........Paid in full!!!......SHIPPED
11. balla fo life $25
12. SJRTK..........Paid in full!!!......SHIPPED
13. GremlinX401..........Paid in full!!!......SHIPPED
14. Boo.........Paid in full!!!.......SHIPPED
15. arstron..........Paid in full!!!......SHIPPED
-------------------------------------------------------------------------------------------------------------------------------------

ULE body with RT front for emag and automag
1.Chronobreak..........Paid in full!!!+ RT WARP BODY and MINIMAG WARP BODY......SHIPPED
2.Justus..........Paid in full!!! + RT WARP BODY......SHIPPED
3.P8ntbal4me.........Paid in full!!!......SHIPPED
4.Big Evil.........Paid in full!!!.......SHIPPED
5.The Ritual...Ricardo De La Cruz.......Paid in full!!!!......SHIPPED
6. lancecst.........Paid in full!!!......SHIPPED
7. Nobody..........Paid in full!!!......SHIPPED
8. Grelvire..........Paid in full!!!.......SHIPPED
9. HolySokz ..........Paid in full!!!......SHIPPED
10. audioSLAVE..........Paid in full!!!......SHIPPED
11.GEE TEE..........Paid in full!!!
12.
13.
14.
15. trygve.....Paid in full!!!! PUMP MILLED MINIMAG BODY (FOR MY REF)

**BigEvil** · 01-07-2013, 06:49 AM

Deposit sent for one of each.

Let's get on this one guys... this is like a dream come true for mag owners.

**Ando** · 01-07-2013, 06:52 AM

I'm still on the fence...We'll see.

**Grelvire** · 01-07-2013, 07:55 AM

.......awww I want, however, this would violate my "I will no longer do pre-orders" rule

Have to sit on the fence and see where this goes

**fierymartel** · 01-07-2013, 08:13 AM

Will the x-valve model work on any other rail?

**Xmagterror** · 01-07-2013, 10:52 AM

Originally Posted by fierymartel

Will the x-valve model work on any other rail?

No only on the original rail unless someone has made a rail for the classic RT that i dont know about.

**Xmagterror** · 01-07-2013, 10:55 AM

Originally Posted by Grelvire

.......awww I want, however, this would violate my "I will no longer do pre-orders" rule

Have to sit on the fence and see where this goes

doing these bodies in a preorder is the only way this project can happen. I machine 100% of everything in my shop. The minimag bodies i did last year turned out awesome.

**Xmagterror** · 01-07-2013, 10:57 AM

Thanks for the sales guys!!!only 12 more to go!!!!! Im sure when people start getting their tax refund money more will sell.

**Chronobreak** · 01-07-2013, 04:55 PM

i thought there was an adapter or additional milling to get the ULE body on a normal RT rail

I am interested in buying one if I can get it on a regular RT rail.

either way il be sending a few barrels for threading in to ya

**knownothingmags** · 01-07-2013, 08:55 PM

should i get two of these for my two sydarms?
really wondering if it is worth my time.
not looking for function, of course the new bodies work, im looking for the neat factor.
then finding two barrels that are worth a

to put in the new bodies.

i need suggestions
not wanting to jack your thread XMT so anyone with input for me,
please shoot me a pm.

always willing to help a guy out with is custom automag stuff.

thankyou,
KNM

**RT Lover** · 01-07-2013, 10:38 PM

pm inbound! now 50 to ule the rail? and how much per barrel to get to cocker threads? i have at least 5 barrels that need cut. also do u need all the slots filled to do the work say u only get 10 filled would those who paid get a body still? TY!

**knownothingmags** · 01-07-2013, 10:48 PM

Originally Posted by RT Lover

pm inbound! now 50 to ule the rail? and how much per barrel to get to cocker threads? i have at least 5 barrels that need cut. also do u need all the slots filled to do the work say u only get 10 filled would those who paid get a body still? TY!

Originally Posted by XMT

We need to sell a combined total of 15 bodies to make this run happen.

i would say we need acombine 15 bodies to be spoken/ 50$ deposite down to get people their bodies.
so on 10 bodies either one or combined will not result in production.

**Xmagterror** · 01-07-2013, 11:37 PM

Originally Posted by RT Lover

pm inbound! now 50 to ule the rail? and how much per barrel to get to cocker threads? i have at least 5 barrels that need cut. also do u need all the slots filled to do the work say u only get 10 filled would those who paid get a body still? TY!

Yes $50 for ULE rail milling.....I can autococker thread twist lock barrels for $35 each....If you send me 5 of them i will cut you a deal..Yes you will still get a body if i only sell 10. To make this ideal i need to sell atleast 15 and will keep the preorder open until then. tax refund time is soon right around the bend so that should help with sales!

Jay

**Xmagterror** · 01-07-2013, 11:42 PM

Originally Posted by Chronobreak

i thought there was an adapter or additional milling to get the ULE body on a normal RT rail

I am interested in buying one if I can get it on a regular RT rail.

either way il be sending a few barrels for threading in to ya

The body on the top of this thread will only fit an automag RT and the 2nd body will allow you to use an x valve on your automag RT. If you are looking for a body to fit your RT pro i will have those available too....its just a standard ULE body with a longer front and the RT style milling....uses the same blank i make the ULE RT bodies out of.....

So many bodies! LOL

**Xmagterror** · 01-07-2013, 11:44 PM

Originally Posted by knownothingmags

should i get two of these for my two sydarms?
really wondering if it is worth my time.
not looking for function, of course the new bodies work, im looking for the neat factor.
then finding two barrels that are worth a

to put in the new bodies.

i need suggestions
not wanting to jack your thread XMT so anyone with input for me,
please shoot me a pm.

always willing to help a guy out with is custom automag stuff.

thankyou,
KNM

Can you put a classic automag RT body on a sydarm? Ive never had a sydarm or even held one so i dont have a clue. It would be awesome though!

**knownothingmags** · 01-08-2013, 12:38 AM

Originally Posted by Xmagterror

Yes $50 for ULE rail milling.....I can autococker thread twist lock barrels for $35 each....If you send me 5 of them i will cut you a deal..Yes you will still get a body if i only sell 10. To make this ideal i need to sell atleast 15 and will keep the preorder open until then. tax refund time is soon right around the bend so that should help with sales!

Jay

and i stand corrected.

**knownothingmags** · 01-08-2013, 12:40 AM

Originally Posted by Xmagterror

Can you put a classic automag RT body on a sydarm? Ive never had a sydarm or even held one so i dont have a clue. It would be awesome though!

i can send you one of my sydarms if i get milling done.
i think the inside is setup like a classic or an x-valve. but is fed/ contained with o rings. i have time tommorow. i will check and snap pics.

**RST** · 01-08-2013, 04:08 AM

Deposit sent for one Aluminum Automag RT Body

**Xmagterror** · 01-08-2013, 10:42 AM

5 down...10 to go!!!
Thanks for the orders!!!

**pgop2.0** · 01-08-2013, 01:38 PM

Deposit sent for X-Valve version. Thanks

**Xmagterror** · 01-09-2013, 10:23 AM

6 confirmed orders with 2 more via money order on the way!!!

**candjpaintball** · 01-09-2013, 10:49 AM

Very similar to a design I did a while back http://www.automags.org/forums/showt...-mag-prototype I like it, will probably do a deposit later today.

**RT Lover** · 01-09-2013, 01:03 PM

XMT.... u have an email

Originally Posted by candjpaintball

Very similar to a design I did a while back http://www.automags.org/forums/showt...-mag-prototype I like it, will probably do a deposit later today.

pretty bad @** i like that.... all these mag bodies are going wild!!!!

**fierymartel** · 01-12-2013, 04:06 PM

These ARE eventually gonna be available for Standard RT rails? Missed the minimag bodies.

**knownothingmags** · 01-12-2013, 04:37 PM

Originally Posted by candjpaintball

Very similar to a design I did a while back http://www.automags.org/forums/showt...-mag-prototype I like it, will probably do a deposit later today.

i would say its more like the ule style bodies.

**RT Lover** · 01-12-2013, 04:40 PM

Originally Posted by fierymartel

These ARE eventually gonna be available for Standard RT rails? Missed the minimag bodies.

They r both getting made

**Xmagterror** · 01-15-2013, 11:45 AM

7 orders placed and 8 to go. only making these once guys!!!
Tax refunds will soon be in peoples hands!!!!!!!!

**tolar250** · 01-16-2013, 12:49 PM

Deposit sent for Aluminum Automag RT Body

**Xmagterror** · 01-16-2013, 12:52 PM

Originally Posted by tolar250

Deposit sent for Aluminum Automag RT Body

Awesome!! That brings us to 8 with 7 spots left!!!

Thread: PRE-ORDERAluminum Automag RT Classic Bodies....RT and X valve versions.rail milling

Thread Tools

Display