*PRE-ORDER*Aluminum Automag RT Classic Bodies....RT and X valve versions.rail milling

[Justus]

I didn't see sQuid's name on the list. What gives, man?! lol

[sQuidvision]

Called out publicly! Zing! If I had a classic I'd be all over this... (If someone wants to donate me a classic I'm in )

[Justus]

It's easy! Sell the Dallera Mag and then pick up an Intelliframe and an Emag rail. Then bolt this on top. Done!

[p8ntbal4me]

Question:

Whats the difference between
The Body thats cut down to work with an X-Valve(body #2) and the ULE body that works with the X-Valve (body #3)??

Reason I ask is I was one of the first to cut a SS classic R/T body to fit an X-Valve and I had the body mounted on an E-Mag rail.... and it worked fine.

Is there a difference?

[Xmagterror]

Question:

Whats the difference between
The Body thats cut down to work with an X-Valve(body #2) and the ULE body that works with the X-Valve (body #3)??

Reason I ask is I was one of the first to cut a SS classic R/T body to fit an X-Valve and I had the body mounted on an E-Mag rail.... and it worked fine.

Is there a difference?

There are some slight and important differences in the on/off hole and body boss position.

[Xmagterror]

Ritual bought the 15th slot and turned this project into a GO!
The pre-order will remain open for a while longer in hopes of selling a few more. Only doing one run of these bodies so if you want one this is your one and only chance to get a brand new body. I will be ordering material soon to make these.

[The Ritual]

Hey Fellas,

Really looking forward to this custom rt classic body! Im new here, but I'm on mcb and customcockers as paintballedbackin88. That name was too long for this forum, so I'm using my old gaming name from my Quake clan days. Cheers to all the familiar names. I'm up to 3 mags in 2 months, so it's time to sign up here.

[swamphawk7]

Suh-wheat ! !!!

[GEE TEE]

That's great news

[balla fo life]

I would like to be put on the list for the classic rt body

[Xmagterror]

I would like to be put on the list for the classic rt body

follow the paypal down payment instructions on the top of the thread. The only way you can get your name on the list is to paypal the $50 down payment.

[Xmagterror]

P8ntbal4me just bought a body! Thanks!!!!

You can still get in on this order. The RT style front bodies for emags and automags really do look amazing.

[mbt]

Make a deadline so we can get our new bodies.

[Xmagterror]

Make a deadline so we can get our new bodies.

Material has been ordered....and i will start working on them when i get it. Im leaving the pre order open for a while longer in hopes of selling some more. Anything below 20 pieces is hardly worth me doing but i agreed to do the run if we get 15 orders.
Im going to finish these as soon as i can because i have some personal car projects i would like to get started on.

[sjrtk]

Down payment sent on Classic RT body

[Xmagterror]

Update: Im running these on the lathe right now. Its going to take a little time to finish the batch because of the 3 different designs i had to sell to make this preorder happen.

You can still get in on this preorder...I have a few slots left.

[lancecst]

I sent you a PM about getting in on this.

[Nobody]

question, i am building an emag. which body would i need for this? i am using a Praxis rail, so i believe that its milled enough for the body.

[RT Lover]

Update: Im running these on the lathe right now. Its going to take a little time to finish the batch because of the 3 different designs i had to sell to make this preorder happen.

You can still get in on this preorder...I have a few slots left.

no rush here

[Xmagterror]

question, i am building an emag. which body would i need for this? i am using a Praxis rail, so i believe that its milled enough for the body.

You need body #3.....BTW...your PM box is full

[pgop2.0]

Probably a stupid question XMT, but am I correct in assuming the RT Classic bodies will use the same washer and c-clip as other AL bodies?

[cougar20th]

So I finally had some time to do a Mock-up of the gun. Using one of the Ule Classic RT bodies. It is one of Xmt's prototype bodies. It will eventually be polished.
The gun is not complete by any means. But every part on it is brand new & never used right down to the RT valve. Its also the first time many of these parts have ever been assembled.

Xmt has my extra matching barrel to be machined to cocker threads.





So if your on the fence this is what they look like assembled.

[The Ritual]

Xmt,

I tried to reply to your pm, but your inbox is full. To answer your question...

Yes, please switch my order from option #1 to option #3, if it is not too late or inconvenient. I wanted to confirm with you that I could use a stock am/mm rail with the ule rt classic style body for emags/automags and that additional ule milling on the rail was not needed.

The required ule milling for the rt classic rail made me wonder if that milling was needed for use with the stock am/mm rail. Thanks again.

[lancecst]

XMT, I can't send you a PM either. I sent payment for body #3, ULE Bodies for Emag and automag with RT style front.

[Xmagterror]

probably a stupid question xmt, but am i correct in assuming the rt classic bodies will use the same washer and c-clip as other al bodies?

Yes the bodies will come with a stainless washer and c-clip

[Xmagterror]

So I finally had some time to do a Mock-up of the gun. Using one of the Ule Classic RT bodies. It is one of Xmt's prototype bodies. It will eventually be polished.
The gun is not complete by any means. But every part on it is brand new & never used right down to the RT valve. Its also the first time many of these parts have ever been assembled.

Xmt has my extra matching barrel to be machined to cocker threads.





So if your on the fence this is what they look like assembled.

Nice Keith!! That gun is going to look so awesome with the body polished!!!!

[cougar20th]

Nice Keith!! That gun is going to look so awesome with the body polished!!!!

Gonna be awhile I still have to wait for the shed/workshop to get finished. Then I can move my polisher/grinder setup back into there. Right now its in a place that has no power.

[lancecst]

Does the body come with the washer and c clip?

[boo]

Paid for a spot on the Automag RT Classic body list just now. Hope i'm not too late! Let me know, thanks!

[Xmagterror]

Yes