Lukes Mini Vert Frame

[luke]

Mini Vert Frame
$180
Double or single trigger frames.
Comes with aluminum trigger, aluminum grips (plain) and grip screws.
Uses AGD safety parts and trigger pins (Not included.)
Double trigger version comes with your choice of triggers: Acis Argo Anker
Single trigger frame: probably just one trigger design (Will get a picture up after I get one machined)

EXTRAS:
Grip engraving available for an additional $15 per set.
AO Logo
AGD-AO Logo
AGD-Lion Logo
Beehive

Extra triggers are $32 each.
Extra panels $35 per set (plain).

As always I will offer cash discounts (or USPS money orders from the Post Office ONLY) . (PayPal “gifts” are not eligible for discounts, sorry)
Green backs or Money Orders purchased at the post office.

I DO NOT ACCEPT:
Foreign Money Orders
Western Union
Money Gram
ETC.
If you did not purchase it at a United States Post Office, I will not accept it.

Will ship International; let me know up front so I can determine shipping charges.

Acis


Argo


Anker


These are the only pictures I have right now. The double trigger frame is a prototype and will have the same lines as the single frame. (In case anyone picks up the differences )





Top View



Invoiced:
Paid and shipped

sQuidvision- 2- Single, Plain Grips - shipped 12/13/13
Grelvire- 1- Single- Lion Logo Panels - shipped 12/13/13
68calsportz - 1 - Double- Lion Grips - shipped 12/13/13
pgop2.0 - 1 - Single, Plain Panels, Banjo Bolt Milling - shipped 12/13/13
splat15k- 1 - Single Plain Grips - shipped 12/13/13
addbot- 1 - Single- Lion Engraving- CANADA - shipped 12/13/13
maogin- 1- Double- Acis Trigger, Plain Grips- shipped 12/13/13

[sQuidvision]

1st! lol... BT owes me a frame :P

In all seriousness ill take two single trigger frames.

Luke would you either post or PM me additional information regarding what you mean by "cash discounts?"

[BTAutoMag]

rofl, NOPE!

im down for 1 double trigger frame with beehive grips

I was out of the room in the machine shop dealing with a Harley head... no fair

[luke]

Luke would you either post or PM me additional information regarding what you mean by "cash discounts?"

Green backs or Money Orders purchased at the post office.

I DO NOT ACCEPT:
Foreign Money Orders
Western Union
Money Gram
ETC.
If you did not purchase it at a United States Post Office, I will not accept it.

[GenaroWasHere]

One single finger trigger for me please!

[crawler24]

Luke! My favorite mag modding person! Put me done for a single frame with the lion grips.

Also, can u hollow more for littler weight? I.e the plate?

[luke]

Luke! My favorite mag modding person! Put me done for a single frame with the lion grips.

Also, can u hollow more for littler weight? I.e the plate?

These are already lighter than the Intelli Frame, plus the grips will be very light. If you remove the plate you will loose any resale value.

[knownothingmags]

just so i understand right 180+32+35, frame+trigger+panels
there is not package deal?
where is the single trigger? whats it look like.

are these a non stocked item then?

end note: i do want a single trigger one.
is there a tentative list?

[luke]

Your way off, reread it.

Its $180
for a frame, trigger, grips and screws.

If you want to buy EXTRA grips or triggers prices are listed.

As stated above "Single trigger frame: probably just one trigger design (Will get a picture up after I get one machined)"

The pre order is just to help me get the initial numbers somewhat close between the two designs before I machine anything.
Plus it will help me figure out what triggers I need to machine.
Everyone is welcome to wait until the production is done to make a purchase but I cant guarantee the correct inventory to go around.

[knownothingmags]

Your way off, reread it.

Its $180
for a frame, trigger, grips and screws.

If you want to buy EXTRA grips or triggers prices are listed.

As stated above "Single trigger frame: probably just one trigger design (Will get a picture up after I get one machined)"

oh holy hell.
awsome. i was more then way off.
i like it.
i need a single trigger version.
i cant pay till the 1st. of FEB.

you know me it takes me time to get my lottery check in the mail.

[luke]

you know me it takes me time to get my lottery check in the mail.

lol, You really won the lottery?

[knownothingmags]

lol, You really won the lottery?

lol no... ive just been getting random pm's about 6 months ago, because of the way it seemed i was spending my money.

[maogin]

Hi. Can I get 1 double tigger frame with an acis trigger. Thanks

[knownothingmags]

i like the cleaness and the versativlity of the frame.
it has more potential then a guted frame.
if anyone is good with there hand can do amazing things with this frame.

[addbot]

are these raw or anodized? tnx
oh and I'm down for One single trigger.

[BTAutoMag]

raw

[luke]

are these raw or anodized? tnx
oh and I'm down for One single trigger.

These will be raw, sorry. I only offer what I can provide in house.

An AO member suggested he may be able to get an anodizer on board for this project, but I will let him chime in on the subject, as I wont be heading that up.

[BigEvil]

These will be raw, sorry. I only offer what I can provide in house.

An AO member suggested he may be able to get an anodizer on board for this project, but I will let him chime in on the subject, as I wont be heading that up.

I'm meeting with my anno guy Sunday and I will talk turkey with him about this.

[Grelvire]

I'll take one single trigger with the lion logo grip panels

[knownothingmags]

can we get a top view of the frames to see how things where milled there?

[mag79]

Ill take a double with acis, plain panel. Pm the cash discount info.

[luke]

can we get a top view of the frames to see how things where milled there?

See above.

MPA3 has a "shelf" to sit on.

[knownothingmags]

See above.

MPA3 has a "shelf" to sit on.

looks great to me.

[Grelvire]

I'm meeting with my anno guy Sunday and I will talk turkey with him about this.

Any word on anno option there BigEvil?

[68calsportz]

Put me down for 1 double frame with lion grips. Also what would be the price with cash discount and minus the trigger since i already purchased an acis.

Thanks

[luke]

Pmed you 68cs

[pgop2.0]

I'm down for a single trigger IF you'd be willing to bore out the rear mounting hole to accommodate a Banjo bolt (i.e. I'd be using it on a classic RT). Let me know, thanks.

~Patron

[BTAutoMag]

that would look really awesome

[BigEvil]

Any word on anno option there BigEvil?

I spoke with Big Eric from Ballers Inc on Sunday. He is currently working on my Xmag and a few other parts for me. I discussed this proect and it wont be a problem. When I have one to show him we will talk prices. Im more than happy to be the pointman on this project - the more work I give him the better my prices are when I need something done

[rseb4agze]

If its not to late I wud like to take (1) single trigger frame with plain grips.