Results 1 to 2 of 2

Thread: Need help: X-valve stops firing after 20 shots

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Need help: X-valve stops firing after 20 shots

    Alright guys I have a tac-one with a x-valve. Valve is stock. After I air it up and can get about 20 shots thru it, then it looses pressure to the trigger. I have trippled Checked to make sure air is still going to it. Any suggestions. Thanks

  2. #2
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    8,039
    Sounds like a bolt stick issue due to a carrier that is too tight. Tune your level 10 bolt setup. Remove your powertube shims, and install the largest carrier that does not produce a leak. Always use the same white oring in each carrier that you try. It is the oring that you are adjusting.
    Except for the Automag in front, its usually the man behind the equipment that counts.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •