Ok all, slightly intoxicated, but I think I am thinking of this correctly...
I want to replicate my Dye clear grip panels with a twist. I have had them for 10 years, they are yellowing and I would like to make a variant of them.
I was thinking, If I made a mold, for just a simple suggestion to myself using plaster of paris, or whaterver it is... dries like ceramic. do you think i could successfully make a mold of the grips? Using a wax release and a product at a local shop (epoxy resin, I have made an entire bar top out of this, 30"x60'+ using 2 gallon kits and 5 gallon buckets, it had vendor pieces inlayed in 1/4" of resin and is in use today at a local bar... crystal clear, I know how to get it glass clear and mix etc...). I wanted to make a mold out of something durable, say something I could produce 20-30 sets (IF they turned out well and people had interest)
Here is the twist, I want to inlay real carbon fiber in the grip, colored, original... whatever. I was thinking if I fill the mold 3/4 of the way and let it dry, I could cut out a piece of carbon fiber from a template and inlay it just short around the edges, then fill the last 1/4 of the mold and have the CF encased in the resin.
I have never worked with CF before... will it soak up the resin uniformly? will it float in the resin? I had to inlay some pictures and coasters in the bar top i did, i had the luxury of being able to glue them down before hand but I wont with this .
Any suggestions are welcome, Id like suggestions on a material to use for a mold (relatively cheap and avaiable to buy same day) and maybe a method or other material to use other than resin to accomplish a clear finish and have the ability to inlay colors or CF.
Sorry for misspellings, Im a little toasty
Also, Id most likely use a shallow tupperware for the mold, fill with whatever medium to make the mold, press the grips in, release the entire thing and have a nice block mold to work with...
EDIT: I also know the resin will yellow after time, but in working with it before, I know that mixing it "hot" (more hardener than resin) it combats the yellowing quite well