Results 1 to 19 of 19

Thread: how do i............!!!!!!!!!!!!!!

  1. #1
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,123

    how do i............!!!!!!!!!!!!!!

    so ive been searching forever to figure this out, it is hindering me finishing 2 markers.

    how the EF do you get the ceramic stripped of the PMI perfect bore ceramic coated barrels?

    im sending them off to a trusted member here. but if they can not succeed in safley taking the couting away from the exterior of the barrel i neeed a sure fire way.

    anyone have any sure fire ideas.

    thankyou,
    Ryan M.
    My sydarm weighs less than yours!!!

  2. #2
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    7,221
    PMI barrels suck. Toss them.
    Email me for low prices on ALL AGD Products and more. tunaman5@verizon.net
    Tunamart

  3. #3
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,123
    Quote Originally Posted by Tunaman View Post
    PMI barrels suck. Toss them.
    oh really ?
    will do.

    did not know they were crap.
    buddy is coming buy later to pick up scrap maybe he can get some extra .02 outa the barrels then.

    that really sucks to hear
    .

  4. #4
    Join Date
    Feb 2005
    Location
    #1 Buck Adams fan
    Posts
    7,856
    Find an aluminum one. They are hard to come by, but they pop up time to time.

  5. #5
    Join Date
    Dec 2006
    Posts
    1,644
    if you really want to strip them, I imagine you would have to get it media blasted. Talk to someone local to you who does Cerakoting.

  6. #6
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,202
    What I find funny here is:

    KNM asked an opinion.

    Tuna said "Throw them away"

    KNM said ok without a second thought

    Tuna's got the pants on this forum

    To leave feedback: Click seller/buyers name, Click feedback score, Click leave feedback

  7. #7
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,123
    Quote Originally Posted by BTAutoMag View Post
    What I find funny here is:

    KNM asked an opinion.

    Tuna said "Throw them away"

    KNM said ok without a second thought

    Tuna's got the pants on this forum
    ive hit alota dead ends here on this one,
    and tunamans was the easiest idea.

  8. #8
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,428
    Quote Originally Posted by BTAutoMag View Post
    What I find funny here is:

    KNM asked an opinion.

    Tuna said "Throw them away"

    KNM said ok without a second thought

    Tuna's got the pants on this forum
    haha....thats too funny! hey KNM have you used the barrel yet to see if you like how it shoots?

  9. #9
    Join Date
    Feb 2011
    Location
    Chicagoland
    Posts
    64
    All barrels are good for at least one shot....

  10. #10
    Join Date
    Oct 2001
    Location
    Plymouth, WI
    Posts
    7,202
    and thats all you need

  11. #11
    Join Date
    May 2009
    Location
    nj
    Posts
    785
    Quote Originally Posted by BTAutoMag View Post
    and thats all you need
    unless there are more than one opponent.

  12. #12
    Join Date
    Oct 2001
    Location
    New Jersey
    Posts
    904
    Quote Originally Posted by Tunaman View Post
    PMI barrels suck. Toss them.
    THE TUNA HAS SPOKEN!

  13. #13
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    7,221
    I am just kidding about the barrels. Basically, a barrel is a barrel and shoots good if your paint fits it.

  14. #14
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,428
    Quote Originally Posted by Tunaman View Post
    I am just kidding about the barrels. Basically, a barrel is a barrel and shoots good if your paint fits it.
    oh man he mite have already thrown tha barrel away dood!!!

  15. #15
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,123
    lol i just wanted to gring one of the markers back to a stock look in a sense.

    i know barrels will shoot just fine if the paint fits

    just thought this would be an easy restore.
    its not.

  16. #16
    Join Date
    Dec 2000
    Location
    offshore
    Posts
    7,221
    I do have some raw Dye Proto barrels in 12" if you want to use those. They were cheap. PM me if you want them.

  17. #17
    Just curious, but why the need to strip it in the first place?

    Also, call me dumb... but I thought it was the INSIDE that was ceramic coated then honed???

    Sorry, never had PMI, or ceramic barrel for that matter... but I thought that the benefit of the ceramic was it being a slicker surface to coat the inside then hone

  18. #18
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,392
    If you are looking at getting the barrel anodized, don't worry about the inner surface. You only need to worry about the outer surface, since it is the only one you will see. The ceramic coating should prevent the anodize remover from working so it won't be a problem on the inner surface. The outer surface will be etched to raw aluminum so that you can have it anodized.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  19. #19
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,123
    Quote Originally Posted by athomas View Post
    If you are looking at getting the barrel anodized, don't worry about the inner surface. You only need to worry about the outer surface, since it is the only one you will see. The ceramic coating should prevent the anodize remover from working so it won't be a problem on the inner surface. The outer surface will be etched to raw aluminum so that you can have it anodized.
    thanks for all the help guys,
    but the barrels are gone.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •