Results 1 to 23 of 23

Thread: RT Classic reg piston and Reg seat questions

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    RT Classic reg piston and Reg seat questions

    I have a couple regulator questions:

    1) While taking apart my RT i was unable to remove the regulator piston assembly without unscrewing the tiny allen set screw on the outside of the regulator housing. I thought this set screw was only to lock the valve into the Z - slot, does it do anything else? should it be so tight that it touches the regulator piston?

    2) In the video that came with the gun, the regulator seat appears to set down into a recessed area tight enough to stay on the regulator body. Mine does not do that, it will fall right out. The other side, the o-ring side, does fit tightly around the regulator valve pin, though. Is anything wrong with mine, or just a slightly different model?

    Here are some pictures. Thanks in advance for any help!
    Attached Images Attached Images   

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •