Mag Nightmares...

[RehKal]

So have any of you ever purchased a used mag on ebay or craigslist and found it... in less than good condition... after receiving it?

I recently purchased a classic RT zmag on ebay. Worth it for the zgrip but the valve and other parts are... frightening. It looks as if it was found in a flooded cellar. The twist lock pin looks as if someone trying to put in the barrel couldn't find the groove and finally tried hammering the barrel into place. (will provide a picture of this in a bit.) Here are some pictures of what I've found.

The valve.




The bolt.



Does your banjo bolt leak? Simply apply teflon tape!


Most of this doesn't bother me truth be told, the steel valve body cleans up easily and I intend to replace the bolt/power tube parts with a lvl 10 anyway... but still. The marker was sold as "in working condition" I can safely say it would not function as the bolt was literally glued to the valve body by the bumper. Ultimately I just wanted the zgrip, the rest is bonus as far as I'm concerned.

Edit: Forgot my most important question. Any particular kind of grease that should be used on the springs in the regulator nut? I think someone had put axle grease in this one...

[Spider-TW]

Edit: Forgot my most important question. Any particular kind of grease that should be used on the springs in the regulator nut? I think someone had put axle grease in this one...

Actually, that's the one spot on a mag that's good for axle/bearing grease. Ambient air moves in and out of there, bringing moisture with it. Bearing grease is good for the steel in that environment. Lithium bearing grease is good for that replacement. Don't use so much that it gets on the other parts though. I usually sniff a spring pack to see where it's been and count that smell as a good sign.

Looking forward to the other pics.

[RobAGD]

Yea the springs get basically axle grease.

In mine I cleaned all that out and mist with a little gold cup.

It was wet for a while, I would also Imagine the Reg Valve Pin will be in bad shape as well.

-R

[blackdeath1k]

I know how it is with the bolt glued to the valve. Mine was that way after sitting 9 years. But the rest....... that's just crazy. And they marked it as working order?

[Cokrkilr]

Id honestly open up the front chamber on that as well, who knows what gunk got down into there.

Looks like it sat in a bucket of sandy muck for a decade

[audioSLAVE]

At least it will feel rewarding after you get all nice and cleaned up, that and you rescued a mag as it appears as well.