Results 1 to 30 of 84

Thread: Some People Never Learn

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2004
    Location
    Jeet yet ?
    Posts
    8,132

    Thumbs down Some People Never Learn

    http://customcockers.com/forum/showt...-Pump-Body-Kit

    Fool me once, shame on you, fool me twice, shame on me.


    (page 14)

    Last edited by going_home; 03-07-2013 at 09:33 PM.

  2. #2
    Join Date
    Jul 2008
    Location
    Massachusetts
    Posts
    552
    I feel sorry for both parties on this, but I feel the need to put some responsibility on rrfireblade, I feel like this is one of those things you'd look for when prototyping- he seems to have lost his edge.

    I love my PTP cocker and would have loved to have another, but I figured I couldn't go without that kind of money for two years with minimal results again *wince*

  3. #3
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,144
    Quote Originally Posted by Drix View Post
    but I feel the need to put some responsibility on rrfireblade,
    All blame should be put on PTP for using him again. Why they did is beyond me. He f'ed up the 2k??? Mag bodies. Doesn't surprise me one bit he screwed this up too.


    Another excellent product PTP. OutFreakingStanding!!!

  4. #4
    Join Date
    Mar 2002
    Location
    VA
    Posts
    3,289
    Yikes.... what a mess! Luckily they will replace all the bodies.

    Btw, I have always been under the assumption that Proteam Products were never up to AGD specs. There is always something "different" about them. Check out this thread to see what people were doing in 2001 about their Micromags/eMicro's. Check out RobAGD and BlackVCG comments about it.
    https://www.automags.org/forums/showt...-with-Pro-Team

    You are right, some people never learn....

  5. #5
    Join Date
    Mar 2009
    Location
    Massassachussessetts
    Posts
    3,280
    Quote Originally Posted by Bunny View Post
    Yikes.... what a mess! Luckily they will replace all the bodies.

    Btw, I have always been under the assumption that Proteam Products were never up to AGD specs. There is always something "different" about them. Check out this thread to see what people were doing in 2001 about their Micromags/eMicro's. Check out RobAGD and BlackVCG comments about it.
    https://www.automags.org/forums/showt...-with-Pro-Team

    You are right, some people never learn....
    I have never had a problem with anything other than the 2009 Micromag (and obviously the 2013 Autococker) and I have owned over 100 markers over the years, purchased both new and used.

    It's funny that you mention "AGD specs" being that the Emag frame was a joint effort between AGD and PTP, and that the "AGD spec" for unibody markers by AGD Europe was inherently tied to the PTP design. That thread was from 2001; the Emag frame only came into being in late 2000 - troubleshooting and field testing is a process that almost never ends before a product is released.

    You have there two examples of markers where the tolerances were off, and there are thousands of examples of their markers between 1992 and 2004 that worked fine. There are enough variances with any production marker that there will be bad units that make it past QC without being caught... And it seems like they tried their hardest to fix it, and made it right in the long run.

    In the last few years, I can remember...

    Angel A1 - Bolt snaps, launches out barrel (RECALLED)

    Tippmann A5 - Back cap snaps, launches hammer (RECALLED)

    Bob Long Vice - Bits of metal lodged in walls of lower tube (REPLACED)

    Azodin KAOS - Bolt snaps, launches out back (NOT FIXED, NOT ACKNOWLEDGED)

    BT SA-17 - Launches 12g cartridges in shooters face (RECALLED)

    Vanguard Creed - Where do I start? (NOT FIXED, OPEN-ENDED DISCLAIMER ADDED)

    Dangerous Power "anything" - Where do I start? (NOT FIXED, NOT ACKNOWLEDGED)

    Machine Vapor - Where do I start? (NOT FIXED, OUT OF BUSINESS)

  6. #6
    Join Date
    Mar 2002
    Location
    VA
    Posts
    3,289
    Frizzle Fry: The most interesting part of that thread wasn't the two examples, it was the fact that RobAGD and BlackVCG (AGD Techs from early 2000s) had so many issues with Micromags that they didn't even want to bother with them anymore. I could only imagine how many mags they worked on back in the day....

    I'm not trying to troll PTP by any means; I actually really like a lot of their products. It just frustrates me that there are so many people willing to pre-order parts only to have them come out with crappy tolerances or not come out at all... The "people" who never learn are the customers, not the manufacture.

  7. #7
    Quote Originally Posted by Bunny View Post
    Yikes.... what a mess! Luckily they will replace all the bodies.

    Btw, I have always been under the assumption that Proteam Products were never up to AGD specs. There is always something "different" about them. Check out this thread to see what people were doing in 2001 about their Micromags/eMicro's. Check out RobAGD and BlackVCG comments about it.
    https://www.automags.org/forums/showt...-with-Pro-Team

    You are right, some people never learn....
    I just want to nip this in the butt. The thread you linked to is about the MicroEmag and BlackVCG provided 1 example of an Micro RT valve that needed a different length pin.

    I currently own 14 Micromags and have owned/ worked on countless more. The classic Micromags DO NOT HAVE TOLERANCE ISSUES. You can take any working AGD classic valve, drop it into any working classic PTP Micromag and have a working marker.

    With that said, it's very sad to see the 2k9 and 2k13 projects going so awfully.

  8. #8
    Join Date
    Mar 2002
    Location
    VA
    Posts
    3,289
    MAGgot: I felt like the thread had more information than just the eMicro in question from the OP. First and foremost.... Pro Team actually swapped the broken eMicro for a Tequila fade Emag. It sucks that they had to do it, but they did the right thing in the end. So kudos to them. The reason why I posted the thread was..

    Quote Originally Posted by BlackVCG View Post
    MicroMags just have sloppy tolerances. I don't like the Benchmark frames that come with them and I don't like the way the body is designed. Almost every Mag I worked on was a PTP MicroMag. We had one MicroMag RT that needed a .765" pin because it was too reactive with any pin that was shorter. This was more than likely due to bad tolerances in the mainbody. They can be okay guns, but I'd much rather have to work on an AGD product.
    As soon as I saw the 2k9 issues I immediately thought of this thread. I remember reading it and was shocked that two knowledgable technicians said the same thing about the tolerances of a micromag. Since I live in the archives of AO, its hard to compare 2013 to 2001. It is second nature for you guys to troubleshoot the issue now, but back 10+ years ago people didn't know what was going on.

    O ya, it also doesn't help that there are MicroMag knockoffs still floating around...

    I would love to outline my thoughts on the issues of Micromag tolerances, eMicro on/off pins sears BODY SPACERS, the 2k9ish mag , and the great recall of 2013, but there seems to be a lot of MicroMag fanatics on the forum right now

  9. #9
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,777
    Wow... Better wait and buy at half price after its delivered. I am almost asking if it comes with a t-shirt as well...

    EDIT: I just saw the results. What's wrong with Tracy!?!? Didn't she have enough with us? And now they do it again?? What a shame...

  10. #10
    Join Date
    Jul 2008
    Location
    Massachusetts
    Posts
    552
    Quote Originally Posted by mpsd View Post
    I am almost asking if it comes with a t-shirt as well...
    I think we should just be happy with our bonus stickers and call it a day

    *edit*
    I found our shirts
    Last edited by Drix; 03-07-2013 at 09:52 PM.

  11. #11
    Join Date
    Feb 2013
    Location
    Northeast Ohio
    Posts
    82
    Wait, what's going on? More crap work from PTP?

    Such a freaking shame. Their work used to be that of legends.

  12. #12
    Join Date
    Nov 2005
    Location
    Sao Paulo - Brazil
    Posts
    2,777
    Quote Originally Posted by Drix View Post
    I think we should just be happy with our bonus stickers and call it a day

    *edit*
    I found our shirts
    What bonus sticker? I didn't get any! LOL

    By the way, let me clarify something. I have several Micromags. Gen 1 (short fixed barrel), Gen 3, 2000 and a 2K9. I honestly never had a problem with any of them (even though I didn't really use the 2K9 but the valve fit all right). I also have several other accessories from them, be it barrels, trigger frames, expansion chambers etc. What bothers me so much is how they screwed up their own name. I don't think anyone should be blamed other than themselves, especially Tracy, who had such a childish reaction when people started complaining about the products they didn't receive for a couple years and, afterwards, how she never returned anyone's money for the problem they caused. Because of that, I will never buy anything new from them again. Not only it's not worth the price they charge, they also don't deserve my business any more. And that's my opinion, only.


  13. #13
    Seems like both a misdesign AND a manufacturing issue.

    It's awesome that they used rails to attach the feed tube thingy. Picatinny would have been nicer, but whatevs.

    They should have attached the feed neck via the exact same mechanism (and that's where the extra beefy Picatinny would be useful). The part could be threaded again, although really the whole idea of (threaded-)feednecks-as-structural-component just needs to go away. Maybe someone will figure it out in the next 30 years. Or not.

    See also: SA-17, Empire Trracer, TM-7, TM-15, etc.

    Bad design right in that area, and worse execution.


    Missteps will happen; it's the response that counts. So now we get to see how PTP responds. Again. As if we needed another example.
    "Accuracy by aiming."


    Definitely not on the A-Team.

  14. #14
    You guys are seriously making me worry about whether or not my completely untouched, unassembled MM 2k9 is going to work or not.... I should put some parts on it just to check it out...

  15. #15
    Join Date
    Jul 2008
    Location
    Massachusetts
    Posts
    552
    Quote Originally Posted by mpsd View Post
    What bonus sticker? I didn't get any! LOL
    Name:  WP_20130308_002.jpg
Views: 369
Size:  31.1 KB

    Am I the only one?

  16. #16
    Join Date
    Jun 2007
    Location
    There is no Spoon
    Posts
    1,827
    Quote Originally Posted by Drix View Post
    Name:  WP_20130308_002.jpg
Views: 369
Size:  31.1 KB

    Am I the only one?
    You must be because I didn't get any.

  17. #17
    Join Date
    Feb 2005
    Location
    Texas
    Posts
    9,305
    Quote Originally Posted by Drix View Post
    Name:  WP_20130308_002.jpg
Views: 369
Size:  31.1 KB

    Am I the only one?
    I got one from Tracy at one of the Tunaballs... its on my AGD parts box.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •