Results 1 to 11 of 11

Thread: barrel ID?

Hybrid View

  1. #1
    Join Date
    Jan 2002
    Location
    southern IL
    Posts
    1,885

    barrel ID?

    2 questions have ran through my head with this for years.

    1. How accurate is one barrel line on staying the same ID? Say dye ultralit to dye ultralite?
    2. Has there ever been a post with common barrels and there ID?

    I have searched for this before. Never with any luck. I'd rather have a hand full of barrels with different IDs than a freak set. Not a fan of only a small portion of the barrel being swapped out. Idk. Mental thing.

  2. #2
    Over on pbn, if you go to the barrels talk section there is a sticky with about 50 barrels listed with the manufacturers bore sizes

  3. #3
    Join Date
    Jan 2002
    Location
    southern IL
    Posts
    1,885
    Most of them old posts I went through have dead links from how old they are. But in reading. It got me to thinking bout my concern with freak barrels. And if it is really a concern.

    How long are the freak inserts? Basically how long is that "optimum" bore size that you can change? And how much bigger is the tip?

    I hadn't ever thought much about this playing in the past. All the paint I ever used seamed to fit my dye ultralite pretty good. But all this paint I've messed with now seams a lot smaller than I remember. And most of my reading over on pbn was commenting about the same thing. Even with paint that has been around forever. In the past it used to be a larger od than what it is now.

  4. #4
    I just looked at the post on pbn to make sure it was there... its titled "list of EVERY paint" or something like that. Post 1 is paint sizes, post 2 is barrel sizes.

    Just in case you looked past it because of the thread title.

    Freak inserts are 5" long, only 1" shorter than the "best" control bore length... and the front I can't tell you exactly how big the bore is. But it would at least need to be .693 because that's the largest size insert.

    My freak with any tip shoots straight as an arrow.

  5. #5
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,444
    I thought the largest freak insert was 0.695". That was the size the Smart Parts All-Americans used in their guns. I suspect the barrel tip was quite large on these.

    My equation barrel only used inserts up to 0.693" and the barrel tip was 0.695". It is one of the nicest, most consistent and quiet barrels I have.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  6. #6
    Join Date
    Jan 2002
    Location
    southern IL
    Posts
    1,885
    I thought the "best". controlled bore was 9". not 6?

    It kills me how small the paintballs seam to be compared to in the past. I don't remember ever feeling like my dye barrel was a large bore. And yet now I do.

  7. #7
    Quote Originally Posted by athomas View Post
    I thought the largest freak insert was 0.695". That was the size the Smart Parts All-Americans used in their guns. I suspect the barrel tip was quite large on these.

    My equation barrel only used inserts up to 0.693" and the barrel tip was 0.695". It is one of the nicest, most consistent and quiet barrels I have.
    Yeah you are right, the inserts I have I just got up to a .693 because as stated a couple times... paint generally isn't that big now days. My digital calipers only read .xx so it just shows a .69 on the reading for the fronts I have. I'm sure its not that hard to get that number though with a Google search?

    Glad you found the list though, it is pretty big and has at least the more popular barrels if not most known to exist on it

    After I got my freak setup for the cocker and mag threads I was thinking about getting rid of my twist locks... but I just can't, a couple of them rival my age haha. More nostalgia than anything since I will probably barely use them over the freak.

    Also, maybe it was 9"? I can't remember, but I'm sure there is enough threads that have been beat to death about that... haha

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •