Results 1 to 15 of 15

Thread: Lots of Mag/ Project parts .. PIC HEAVY !

  1. #1
    Join Date
    Jul 2012
    Posts
    31

    Lots of Mag/ Project parts .. PIC HEAVY !

    OK, so, in all of my years of paintball (15) i have always been a cocker shooter, so i figured i would try my hand at mags. Well, i bought all these parts and started out with a pnuemag, then i decided to make and egomag, then a spydermag ... and low and behold i didnt finish any, lol. I had the pnuemag set-up and operating, as well as the go mag set-up, i just never got it al, fine tuned because i know nothing of mags. So here is what i have.

    1) X-valve with level 10. I have aired this valve and cycled it, i dont know if its "tuned" or not, but i know it cycles and dosent leak. good condition with a few small nicks.

    2) Vert Feed ULE Body, good condition

    3) AGD Intelliframe all grinded up with set screws and trigger set screw, also has 2 way valve and pnuematic ram with dye stickies. My first pnuemag frame, so it isnt perfect, but it works.Has some scratches and what not from modifying, but nothing to to bad.

    4) 3000 PSI AGD Flatline Tank Reg with cradle and Small Drop.

    5) 05 ego frame. has holes drilled to fit automag, comes with board, hybrid grips and electro-pnuematic solenoid. The connector attachment wasnt the best, but i have tested it and it makes the marker fire. I have some brand new connectors and wire connectors i will send withh it if you wanna re-do it. The frame still needs to be smoothed out, but it will work.

    6) AM/MM Rail. Rail was previously sandblast finished, i painted it black, paint is holding up well on it

    7) NDZ on-off asa, dust black, good condition

    8) Palmer's LPR, good condition

    9) Spyder frame, has some paint chipping off, havent modified it in any way. Also has Dye Sticky Grips

    10) Gloss black Gas-thru grip

    11) Raw poished vert ASA

    12) Automag Sear and Pin .. no trigger pin

    13) Powerfeed classic Body with a raw blasted finish.. the blast was smooth, no deep pitting really

    14) Benchmark Style Frame with metal grip panels, Also blasted.

    15) 16" All american Barrel, also blasted

    Pics:

    [IMG][/IMG]

    PRICES:

    1) X-Valve-SOLD
    2) ULE body-SOLD !
    3) AGD Intelliframe with pnuemag set-up and Stickies - SOLD !
    4) 3000 PSI Flatline reg with cradle and Drop -45 Shipped
    5) O5 EGO frame with stock board and Electropnuematic Solenoid - SOLD
    6) AM/MM Rail - SOLD
    7) NDZ on-off 25 Shipped
    8) Chrome Palmer's LPR- 25 Shipped
    9) Spyder E-frame with Stickies - 35 shipped
    10) Gloss Black Gas-Thru Grip -15 Shipped
    11) Raw Polished Vert ASA 15 Shipped
    12) Automag sear and Pin - SOLD
    13) Classic powerfeed body - 35 shipped
    14)Benchmark style frame- 20 Shipped
    15) 16" All American AM barrel- 20 shipped


    Rules:
    -I DONT SHIP FIRST
    -PAYPAL ONLY
    -NO TRADES
    -POST AND THEN PM
    Last edited by *c-ro*; 05-17-2013 at 02:01 PM.

  2. #2
    Join Date
    Jul 2012
    Posts
    31
    MORE PICTURES
    Last edited by *c-ro*; 04-19-2013 at 09:05 PM.

  3. #3
    Join Date
    Jul 2010
    Location
    Kitchener, Ontario,
    Posts
    205
    Pm'd

  4. #4
    Join Date
    May 2002
    Location
    West Coast
    Posts
    3,583
    I'm interested in the ULE, I-Frame and maybe the xvalve. Any interested in a PTP Sleeper Cocker in a trade? I'll PM you.

  5. #5
    Join Date
    Apr 2012
    Posts
    128
    pmed about the intelli

  6. #6
    Join Date
    Jul 2012
    Posts
    31
    Replied to all, Sear and Pin Are SOLD !

  7. #7
    Join Date
    Jul 2012
    Posts
    31
    PNUEMAG Frame is SOLD !

  8. #8
    Join Date
    Oct 2003
    Location
    Wisconsin
    Posts
    1,973
    pmd about ule body
    Last edited by rifleman wi; 04-22-2013 at 08:10 PM.

  9. #9
    Join Date
    Jul 2012
    Posts
    31
    ULE body SOLD !

  10. #10
    Join Date
    Jul 2012
    Posts
    31
    bump

  11. #11
    Join Date
    Jul 2012
    Posts
    31
    still lots of good stuff left !

  12. #12
    Join Date
    Jan 2013
    Location
    Fort Wayne, In
    Posts
    17
    I'll take the xvalve if still available.

  13. #13
    Join Date
    May 2004
    Location
    San Antonio
    Posts
    13
    If he ^ doesn't take the Valve I will.

  14. #14
    Join Date
    Jul 2012
    Posts
    31
    X-Valve is SOLD !

  15. #15
    Join Date
    Nov 2011
    Posts
    126
    That is a hopper left, PF right body, correct? Thanks.
    AO Feedback |*| MCB Feedback |*| Please ship to me in Canada using USPS (US shipping also an option...US Parcel Pickup)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •