Results 1 to 4 of 4

Thread: Need an E/X Mag Schematic

  1. #1
    Join Date
    Sep 2005
    Location
    Charleston SC
    Posts
    1,185

    Lightbulb Need an E/X Mag Schematic

    I need a schematic for the board (yes I have searched). I picked up a couple of PBX Viking frames which use a HES to fire the marker. The very same part number which our Mags use and if I ever want to get these things working, I need the wiring diagram to get there.

  2. #2
    Join Date
    Oct 2001
    Location
    Maine, New York
    Posts
    1,165
    I am sure p8ntbal4me would be able to point you in the right direction if nobody else offers a quick response.

  3. #3
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    7,370
    I can't find my HES data sheets, but I think the pinout is:

    Pin 1 = power
    Pin 2 = ground
    Pin 3 = switched output


    Emag pinouts (not fully complete)

    Atmel AT90S2313-4SC with connection points labled
    Pin Name Connection
    1 RESET CN4 pin 1
    2 (RXD) PD0 Stamp pin 7
    3 (TXD) PD1 Stamp pin 8
    4 XTAL2
    5 XTAL1
    6 (INT0) PD2 Trigger input; stamp pin 9
    7 (INT1) PD3 To MOSFET U3 (solenoid)
    8 (T0) PD4 Switch PB2, stamp pin 10
    9 (T1) PD5 Switch PB1, stamp pin 11
    10 GND
    11 PD6 (ICP) HCMS CE
    12 PB0 (AIN0)
    13 PB1 (AIN1)
    14 PB2 HCMS clock
    15 PB3 (OC1) HCMS data in
    16 PB4 HCMS RS
    17 PB5 (MOSI) CN4 pin 4
    18 PB6 (MISO) CN4 pin 3
    19 PB7 (SCK) CN4 pin 2 (burst jumper)
    20 Vcc


    CN4 pin 1 RESET
    CN4 pin 2 SCK
    CN4 pin 3 MISO
    CN4 pin 4 MOSI
    CN4 pin 5 GND

    CN2 pin 1
    CN2 pin 2
    CN2 pin 3 Vcc
    Except for the Automag in front, its usually the man behind the equipment that counts.

  4. #4
    Join Date
    Sep 2005
    Location
    Charleston SC
    Posts
    1,185
    Quote Originally Posted by athomas View Post
    I can't find my HES data sheets, but I think the pinout is:

    Pin 1 = power
    Pin 2 = ground
    Pin 3 = switched output

    That's exactly what I needed. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •