Results 1 to 12 of 12

Thread: Center feed minimag body-need help

  1. #1
    Join Date
    May 2013
    Location
    NOVA
    Posts
    185

    Center feed minimag body-need help

    So I have a minimag cf body but I noticed there's not a small pin in the body to accept a mag twist and lock barrel is this correct? Or is this a lost cause

  2. #2
    Join Date
    Jan 2008
    Location
    central pa
    Posts
    64
    The pin sits in your rail, not the body

  3. #3
    Join Date
    Apr 2010
    Location
    triple mag shop.
    Posts
    3,112
    throw a pic up of what you are talking aboutl
    My sydarm weighs less than yours!!!

  4. #4
    Join Date
    May 2013
    Location
    NOVA
    Posts
    185
    Oh gotcha thanks a lot man it's been a while haha

    Quote Originally Posted by warchild69 View Post
    The pin sits in your rail, not the body

  5. #5
    I demand pictarz!

  6. #6
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,189
    You can buy a new twist lock pin from Tuna, AGD, or the BSTs.

    The previous owner probably took it out because they wanted to use a non-cf barrel in it, friction fitting it somehow. Center feed barrels are harder to find.

    You can also use a Doc's Adapter with your new twistlock pin, if you don't have a cf barrel you like.

  7. #7
    Join Date
    Mar 2007
    Location
    Londonderry, NH
    Posts
    1,326
    Just for clarification, are you using an original stainless center-feed MiniMag body w/ the smoke-stack feed or one of the newer aluminum bodies that XMT created? The newer bodies are AC threaded.

    Sorry if this was obvious, just couldn't tell from the original post

  8. #8
    Join Date
    May 2013
    Location
    NOVA
    Posts
    185
    Wow thanks for all the help guys it's been a while since I put a mag together and it's the original body for a cf minimag with the high rise center, I plan on sending it out to shorten it down an possibly change the cloro to black or white.

  9. #9
    Join Date
    Mar 2009
    Location
    Massassachussessetts
    Posts
    3,212
    Quote Originally Posted by Zeropjc View Post
    it's the original body for a cf minimag with the high rise center, I plan on sending it out to shorten it down
    Please do not do this.

  10. #10
    Join Date
    May 2013
    Location
    NOVA
    Posts
    185
    Is this not a good idea? What would be wrong

  11. #11
    Join Date
    Jul 2007
    Location
    New Hampshire
    Posts
    454
    Quote Originally Posted by Zeropjc View Post
    Is this not a good idea? What would be wrong
    They are rare and are worth a decent amount when they are not cut.

    See post #3

    http://www.automags.org/forums/showt...t-of-my-stuff!

  12. #12
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,426
    i still have the center feed Diggers barrel if you wanna get it?

    the feed neck is a high rise but has a after market clamping feed neck not the original basket like the body in tha thread emcl29 posted up? so it has been molested just a lil...not fully cut yet..haha? here are a couple of pics:



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •