Results 1 to 26 of 26

Thread: Concept: Multi-Angle Trigger Frame.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Lightbulb Concept: Multi-Angle Trigger Frame.

    Yes, I'm back with another idea to chuck out into the ether.

    I was playing with my Z-Framed Mag on Sunday when it occurred to me that my trigger frame played a large role in my style of play. When playing with the Z I am very comfortable shooting from cover but feel rather wonky when shooting on the run. With an Inteli, or any other standard frame, it's just the opposite.

    So I'm thinking wouldn't it be great if someone made a frame that offered everything from the tight comfort of the Z, to the on the move utility of a standard frame, to the lay down ease of a rifle. So I drew something up. It should be self explanatory.

    Would you buy it? Would you build it?

    Name:  3waytrig.jpg
Views: 153
Size:  11.6 KB

  2. #2
    Join Date
    Jan 2001
    Location
    Cottonwood, Az.
    Posts
    8,183
    It could probably be done but I doubt it would look very good.

  3. #3
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,441

  4. #4
    Join Date
    Jul 2002
    Location
    Western Mass
    Posts
    582
    For me it comes down to a frame feeling familiar. I love the CCM 86* frame and personally have no issues shooting guns with them from any position. That was a big factor in me buying one of Luke's frames. The grip angle is very similar.

  5. #5
    Quote Originally Posted by luke View Post
    It could probably be done but I doubt it would look very good.
    Form following function. The half moon trigger is all but a design requirement since it will need to be comfortably pull-able from Z-to-rifle and everywhere in between. I think you are up to the challenge . Besides, who's to say what looks good. 10 years ago Mags were ugly and stacked tubes were hot. Now all the new markers look like old mags. Besides it's a nifty way around that 90 degrees and forward patent (WDP?).

  6. #6
    Join Date
    May 2009
    Location
    nj
    Posts
    828
    The functional issue of the tank/asa it what would need to be addressed. I know there are adjustable mounts but it would need to follow/counter the movement of the frame along its arc of travel orwould not be a functional design. It is a good idea and just a quick though looking around me (a broken ratchet head actually) completely doable design. But getting the tank to counter the movement would be the hard part.

  7. #7
    suaze Guest
    Yeah the tank positioning is a major obstacle.

    I think a good idea would be to build just the upper frame and the user can customize with whatever grip they like; 45*, 86* and/or make it compatible with real steel parts.

  8. #8
    Join Date
    Oct 2001
    Location
    Inception Designs HQ
    Posts
    3,067
    the biggest problem i see is that while the frame can or could be changed, the trigger geometry is the key to this. with the trigger rod, there are clearance issues and when you go to change it from a "45" to a Z frame, you will need to take in that.

    also, will this frame be variable geomtry? that is, one frame and you can either change it from 45 to Z and everything in between on the fly or through one setup, where one person can have a Z and another have a 90 and so on?

    and like what was said before, anything and everything that is mounted to the frame will have to change or be able to change with the frame.

  9. #9
    Join Date
    Jan 2002
    Location
    Halifax, N.S., Canada
    Posts
    8,039
    This idea was tossed around back about 10 years ago. No one ran with it though. The trigger assembly would need to be a stationary part. The grip would have to rotate at some point below it. The tank ASA would need to have a stationary support so that it wouldn't change angle. A double pivot could hold it horizontal while allowing the frame to rotate forward. I think it is do-able.
    Except for the Automag in front, its usually the man behind the equipment that counts.

  10. #10
    Quote Originally Posted by Nobody View Post
    the biggest problem i see is that while the frame can or could be changed, the trigger geometry is the key to this. with the trigger rod, there are clearance issues and when you go to change it from a "45" to a Z frame, you will need to take in that.

    also, will this frame be variable geomtry? that is, one frame and you can either change it from 45 to Z and everything in between on the fly or through one setup, where one person can have a Z and another have a 90 and so on?

    and like what was said before, anything and everything that is mounted to the frame will have to change or be able to change with the frame.
    Yes on the variable geometry. No on the switching frames. The idea is for one frame that can swivel from a pivot point at roughly the center of the circle in the illustration.

    Mounting the tank to the bottom of the frame on this setup is a whole other bag-o-worms. Easiest solution is just to go back bottle. Or use a decently offset drop so the tank clears the valve and foregrip in its respective positions.

    The moving parts would have to be limited to the outer portion of the frame so as not to interfere with the sear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •