Low velocity issues.

[steve_81]

It sounds like you can't get enough tension on the regulator springs to get to the higher pressure required to use the smaller chamber. Try adding some washers inside the adjuster so that it can push the regulator assembly in farther before the nut bottoms out.

Thanks for the suggestion. I will try that out as soon as I get more air this weekend. I'm going to spend the day at the field trying to fix the problem. It makes sense. The velocity continued to rise as I turned the velocity adjuster in until I couldn't turn it anymore. Is there any other thing that I should check as well? I will update this thread Once I try all that is suggested.