Getting out, All must go: Guns, Parts, things...
So the title says it, I'm getting out of the sport/hobby I've played once in the last year. While that was a blast I've got too much money tied up in this also looking to try a different hobby.
1. No trades, I'm getting out not looking to pick up more stuff
2. Paypal only
3. US residents add 25$ for shipping and insurance on Markers
4. Canadian residents add 15 for shipping and insurance on Markers
5. Prices are negotiable, I Have not been on here for some time and have not kept up with current pricing if its out to lunch let me know
6. If you're buying multiple pieces we can come to some kind of price agreement
7. small parts will not be expedited.
8. Ask Questions! if you want to know more about something ask, I also have more pictures. all deals are final.
My Feed Back Page
Ok heres the goods. Misc stuff first.
ccm style clamping feedneck - 15$
AKA feedneck - sold
on/off and palmers micro rock lpr - 60$
15* asa - 45$ each
15* asa with bike grip -50$
top to bottom
all american cocker thread 18" - 20$
cocker threaded ? - 10$
proto cocker thread - 20$
Armson twist lock crown point - 30$
j&j edge kit 4 backs 2 fronts and bag, phantom thread - 50$
WGP Kaner barrel kit 3 fronts, 5 backs and hard case, cocker thread 75$
Grillz - 25$ each Gone
All tanks are High Pressure regulated and 4500psi and come with covers. all tanks need to be hydro tested.
crossfire 45/45 crack in gauge cover - 45$
PE 45/45 - 50$
Empire fuel removable regulator 71/45 - 60$
Diet and pump milled rail done by warpedmephisto - 90$
NIP custom mounting socket, various mounting pieces, feed neck clamp, about 1' warp hose. not pictured 10 qpods. - 150$
Last edited by RangerX; 08-13-2013 at 08:16 PM.
x-valve with standard and ULT trigger Now 190$
Logic UMF with zap cheater pnuematics, tickler lpr and Sleeper cp on/off - Now 375$
The Gun Porn!
Punisher Customs phantom condition 8.5/10, Cocker threaded body, custom pump handle, pachmayer grips, feed adapter, rear drop out changer, hammer head barrel and 2 extra backs. - Now 380 $
Right feed Phantom Condition 8.5/10, WWA one piece feed, deadly wind freak bored fiber barrel, t-stock, rear dropout changer - Now 310 $ comes with j&j kit
Longbow Tac1, missing from the frame is the trigger and pin and safety I have a safety kit for it but im missing the ball. comes with 3 longbow mags, qbow adapter, dye stickies, xvalve parts kit and ult parts kit (ULT installed in valve) 600$
04 viking Condition 8/10 DC fsp "butt crack milling" tadao m5 board, scm3, might max, humphrey noids, jmj trigger, aka feedneck, cp on/off tool kit, parts kit (3 eyes, a couple micro switches, eye harness misc hardware - Now 825 $
lastly My BABY, No holes Karta Z-grip pneumag Condition 9/10
No Holes baby! a couple minor dings and one tiny scratch through the ano on the underside at the valve end
Luke milled Z-grip frame and panels
6" shark tooth barrel +1 extra back, 16" deadly wind freak barrel and 3 inserts
sub zero feed neck, cp on/off and palmers micro rock
my parts kit - multiple lvl 10 carriers, shims, o-rings, main relief, theres a couple emag parts in there (selector switch), extra ULT assembly, thumb screws, probably well over 100$ in parts most new
even though I'm leaving its hard to say good bye to this one. so the price will be high at 1600$ mostly cause i need to put a price on it.
Last edited by RangerX; 08-13-2013 at 04:42 PM.
wish I had the cash for the zap cheater lower lol :/ hey what kind of bumper (green) you have on the x valve?
more pics of the Logic, can we see top down, where is the rammer?
its actually one of the blue RT bumpers, I had that valve in an e-mag and the clear soft bumpers get chewed up easier.
Originally Posted by zins184
the sear sits right up against the rammer. (rammer is in the valve)
Originally Posted by djinnform
I will take a 15* ASA, and if you part it I'll hop in line for the karta body + Rail.
ill take the sub zero please...pm'd ya
Interested in the Kaner kit. Is it gloss or dust?
the Kaner kit is gloss.
Originally Posted by rschoi_75
All deals agreed upon will ship friday of this week.
the 2 feednecks, what are they threaded for? i would assume Angel(ULE threading) but need to confirm.
oh yeah, if that is the threading mags use. been so long since i've had to check any of that
Originally Posted by Nobody
Interested in the sharktooth 6" and back if your willing to part
How much for just the parts kit?
Wife is interested in both masks. From the picture they look to be in good shape. How good is the foam? And what lenses are in them.
Pm me about feed neck (aka)
This is going to a good home
Originally Posted by RangerX
bump for the week, back from vacation
get me better pics on tthe feednecks pls
Originally Posted by lobo_fuerte
Bump with some price drops
Tags for this Thread