Swap cone springs between your two loaders. Repeat your tests on the problematic marker. See if problem follows cone spring. If so, that's the stiffer spring, which has enough to push past one detent but not two.
Might also want to try each loader (starting with the one pushing harder) on all your various detents one at a time to see if detents vary in strength, as Nobody suggested. i.e. Does it push past one or more individual detents and not the other(s)?
I guess you could also swap motors or boards, whichever is easier for you. You've got a little DOE on your hands!
Does the v35 give a bps for the different speed settings, or is it just a relative slow, medium, fast, etc.? I ask because the slowest setting on the v35 might be faster (i.e. push harder) than the single setting (or current setting, if adjustable) on the non-v35 hopper.
Last edited by nak81783; 06-28-2013 at 03:44 PM.
Last of the Salzburg Clan