Results 1 to 10 of 10

Thread: need help

  1. #1
    Join Date
    Jun 2013
    Location
    Bryant Arkansas
    Posts
    31

    need help

    So I'm working on a custom mag project and need help with a cheap way to get a pump working but mostly I'm looking for a pump handle and the linkage arm. If y'all can help or point me to the right person to talk to that would be great thanks.

  2. #2
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,427
    Quote Originally Posted by TimberlineShoot View Post
    So I'm working on a custom mag project and need help with a cheap way to get a pump working but mostly I'm looking for a pump handle and the linkage arm. If y'all can help or point me to the right person to talk to that would be great thanks.

    well most custom mags or pump mags will fall into the category of cheap. you can try to make your own tho?

    what is your definition of cheap?

  3. #3
    Join Date
    Jun 2013
    Location
    Bryant Arkansas
    Posts
    31
    75 or lower I'm already gonna be spending a lot on this but if I could find the technical drawings for the linkage I could end up making my own.

  4. #4
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,427
    Quote Originally Posted by TimberlineShoot View Post
    75 or lower I'm already gonna be spending a lot on this but if I could find the technical drawings for the linkage I could end up making my own.
    ive only seen technical drawings for the milling for the body, rail, and pump rod for the AGD kit. if you have the ability to make your own maybe look into designing it as well? then you can determine how cheap it is?

  5. #5
    Join Date
    Jun 2009
    Location
    Kentucky
    Posts
    4,146
    There's nothing cheep about a pump mag. I think the cheapest kits were done by XMT which he's fallen off the face of the earth. I know rainman just did a run of new kits on MCB which all sold out and I know Cyberave68 selling a tactical Cerberus kit for $175



    Not sure if Cyberave68 frquents here but you should be able to get a hold of him on BEO.
    http://bigevilonline.com/member.php?u=8

    So you know what they look like

    dsc5626p.jpg

  6. #6
    Join Date
    Sep 2008
    Location
    Ohio
    Posts
    4,598
    I may have a stock delrin AGD handle if it helps. PM me if interested. Just the handle.

  7. #7
    Join Date
    Jun 2013
    Location
    Bryant Arkansas
    Posts
    31
    Quote Originally Posted by OPBN View Post
    I may have a stock delrin AGD handle if it helps. PM me if interested. Just the handle.
    If you could send me a pic of the back end of the handle you have I think I'll just design myself a pump handle

  8. #8
    Join Date
    Feb 2011
    Location
    PHX, AZ
    Posts
    1,427
    here are some home brew pump kits:
    http://www.mcarterbrown.com/forums/a...cha-think.html
    http://www.mcarterbrown.com/forums/c...rappy-mag.html

    Spiders pump kit is definitely one of the nicest that i have seen!!!

  9. #9
    Join Date
    Jun 2013
    Location
    Bryant Arkansas
    Posts
    31
    I do agree. I might look into something like that or just make my own out of scratch.

  10. #10
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    3,192
    Pretty much anything you hang on polished stainless steel guide rods works great.

    On the other hand, Rainman is working on a new run of pump kits. Get your $ ready.

    http://www.mcarterbrown.com/forums/r...ts-update.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •