Results 1 to 30 of 36

Thread: RT classic body compatability question

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    louisiana
    Posts
    357

    Question RT classic body compatability question

    OK Mag Guru's here one for you...

    Im starting on Mag project #2 and I want to use a RT Classic body, E-Mag valve, standard AM/MM rail, standard sear, and intelliframe. I know I will have to modify the body to run the air line to the valve. Im thinking about notching the body so the fitting just slides thru it.

    My question is:
    Will all the parts I listed work in a RT Classic body?

    I like the long body look of the RT Classic, and I also got if for a good price from bigbthebenji. Ive never owned a RT Classic so I dont know what can go with what.

    thanks!

  2. #2
    Join Date
    Mar 2012
    Location
    Norfolk VA
    Posts
    576
    the back of the classic body needs to be cut off. The classic RT valves were smaller diameter that all others

  3. #3
    Join Date
    Aug 2006
    Location
    louisiana
    Posts
    357
    that is exactly what I didnt want to here

  4. #4
    Join Date
    Aug 2006
    Location
    louisiana
    Posts
    357
    any idea about the rest?

  5. #5
    Join Date
    Mar 2012
    Location
    Norfolk VA
    Posts
    576

  6. #6
    Yup, the only way its gonna work is to cut the rear of the body. Other than that, any other part will be compatible. The RT Classic valve is a smaller diameter than all the other valves. That's why it fits inside the stock body as opposed to sticking out the rear like most other mags.

  7. #7
    Join Date
    Aug 2006
    Location
    louisiana
    Posts
    357
    well there goes my whole Idea... I guess Ill have to conform like the rest.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •