Results 1 to 8 of 8

Thread: Used vs New X Valve and Clamping feed neck question

  1. #1
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129

    Question Used vs New X Valve and Clamping feed neck question

    I understand the obvious price difference, but would there be any drawback to buying an X valve used? Outside of maybe some anno rub?

    Also, if the ULE body is Angel threaded feedneck, which of these in this list is "Angel threaded" =/
    http://store.customproducts.us/index...6&categoryID=5

    I am stumped, but maybe its a simple question to someone else.
    Thanks,
    Jason

  2. #2
    Join Date
    Mar 2009
    Location
    Massassachussessetts
    Posts
    3,217
    1) Buying a used X-valve can actually be a good thing; they're already broken in, and they often come set up. The only reason I wouldn't buy one used is that people tend to overcharge... $185-$225 for a used valve that costs $250 brand new is a joke. I honestly believe that the only reason people get away with it is that many don't know that AGD dropped the price a few years ago; they used to be $300+.

    2) Do not buy a CP feedneck; they're not truly Angel threads but semi-compatible ION threads (like a hammer is compatible with a screw). Look for CCM, Lapco, Bob Long, etc and you will get functional feednecks with the proper specs. Stay away from no-name brands too. I love CP but they are not the place to go for Angel feednecks. *EDIT: looks like they pulled "angel threading" from their site finally.

  3. #3
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129
    Yeah, I saw an x-valve in the bst for $150... this sickness kills me. I haven't even played 1 game with the gun! I read something about the differences in angel threaded feed necks. They started to come different in 04'/05', or something. Is it still called "angel threaded" when I would look up CCM, Lapco, or Bob Long?

    EDIT: Found this on ebay, just lists it as "Angel Threaded" Weird, I have seen ones where the thread is on the body, not the feed neck itself. SMH.
    http://www.ebay.com/itm/CCM-Angel-Fe...item4175fdc087
    Last edited by Stealthpanda; 09-08-2013 at 12:33 AM. Reason: Derpy Hooves

  4. #4
    Join Date
    Mar 2009
    Location
    Massassachussessetts
    Posts
    3,217
    Quote Originally Posted by Stealthpanda View Post
    Yeah, I saw an x-valve in the bst for $150... this sickness kills me.
    $150 is pretty fair. If it's not too rough I'd snag that; it's the best you'll see.

    Quote Originally Posted by Stealthpanda View Post
    I haven't even played 1 game with the gun! I read something about the differences in angel threaded feed necks. They started to come different in 04'/05', or something. Is it still called "angel threaded" when I would look up CCM, Lapco, or Bob Long?
    Yep, that'd be "Angel Threaded" - the same pattern was used by AGD and AM but they patterned after WDPs Angel and are fully compatible. Every Angel accepts the same feednecks, from the 1455 (LED) to the A1 Fly SB. I use CCM almost exclusively; they fit everything and have excellent finish quality, plus the helical clamping system is firm and durable. Still, anything from a major brand other than CP will get the job done as long as it's made for Angels.

  5. #5
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129
    Solid info man. Wish I could swing the valve... although I have spent a considerable amount on paintball stuff in recent heh... Thanks again,
    Jason

  6. #6
    Join Date
    Sep 2008
    Location
    Sunny Florida- Woot!
    Posts
    4,661
    $150 for and X is a decent deal. The reason the one in the BST is so cheap is the ano is washed out. Think someone started to strip it or something. It also mentions that it is chuffing which means it will have to be tuned. Usually a cheap thing to do, but can be frustrating for a person new to AGD markers.

    I always buy used as even though they are only $50-75 cheaper than new, it's still $50-75... New ULE bodies are only $145 or so IIRC and people regularly pay $100 for used ones. AGD parts simple hold their value pretty well.

    I am a fan of AKA feednecks. Well made and slightly cheaper than the CCM. A+ also makes a nice feedneck.

  7. #7
    Join Date
    Aug 2013
    Location
    South Jersey
    Posts
    129
    I just started to fully understand the classic valve, and managed to get my level 10 tuned right, give or take that spring/velocity issue. Going to wait on the x valve. I hear its a night and day difference though. Definately need a new feed neck prior to the next time I play.

  8. #8
    Quote Originally Posted by OPBN View Post
    AGD parts simple hold their value pretty well.
    Bingo. It's easy to say "this should sell for cheaper" when you're a buyer, and cite your reasons why. But when people buy and sell routinely at a certain price range, that generally tells you the market value (I generally see nice, used X-valves go more for the $185 to $210 range depending on condition and extra bits). Something is simply worth what someone else is willing to pay. With AGD parts, market values are pretty consistent due to the high quality and longevity.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •